Cisco Systems Cisco Unity 3.1 Configuring Cisco Unity for the Integration, To enter port settings

Page 19

Avaya Definity Gx/PBXLink Integration Guide for Cisco Unity 3.1

Configuring Cisco Unity for the Integration

Configuring Cisco Unity for the Integration

After ensuring that the Cisco Unity server is ready for the integration by completing the appropriate tasks in the Cisco Unity Installation Guide, perform the following procedures to confirm that the integration is enabled and to enter the port settings.

To confirm that the integration is enabled

Step 1 On the Cisco Unity server, go to the Cisco Unity Administrator by doing one of the following:

•In Internet Explorer, go to http://<server name>/web/sa.

•Double-click the desktop shortcut to the Cisco Unity Administrator.

Step 2 Go to System > Licensing > Licensed Features.

Step 3 In the Integration field, confirm that the setting is Serial for a single phone system integration or Multiple Integrations for a dual phone system integration.

Step 4 If the setting is not Serial or Multiple Integrations, contact your sales representative for the necessary system key.

Step 5 Go to System > Switch. Confirm that the settings match those in the following table. If the settings are incorrect, integration features may not be enabled.

Table 22	Switch Settings

Switch Parameter		Required Setting

Manufacturer		Avaya

Model		Definity Gx

Switch PBX Software Version		All (Analog MWI)

Integration		Serial

Step 6 Enter the codes that turn message waiting indication on and off. The MWI codes are located in the Active Switch Setting area at the top of the Switch Settings page.

Step 7 Click the Save icon.

To enter port settings

Step 1 In the Cisco Unity Administrator, go to System > Ports.

Step 2 Select a port in the table.

Step 3 Indicate the settings for the port.

For best performance, use the first voice messaging ports for incoming calls and the last ports to dial out. This helps minimize the possibility of a collision, in which an incoming call arrives on a port at the same time that Cisco Unity takes the port off-hook to dial out.

Avaya Definity Gx/PBXLink Integration Guide for Cisco Unity 3.1

	OL-1846-06	19

Image 19

Contents Integration Steps Integration TasksPhone System RequirementsCisco Unity Server Integration Description Configuration for 24 or Fewer PortsConfiguration for 25 to 48 Ports Configuration for 49 to 72 PortsPBXLink Box Connections Number of Voice Messaging Ports to Install Integration FeaturesNumber of Voice Messaging Ports That Will Answer Calls Programming the Avaya Definity/PBXLink Phone SystemTo program the Avaya Definity/PBXLink phone system Option SettingOption Inspect Call-appr Button Assignment SettingCall-appr NormalAbrdg-appr Extn 3rd voice mail extension Feature Button Number SettingAbrdg-appr Extn 1st voice mail extension Abrdg-appr Extn 2nd voice mail extensionAbrdg-appr Extn 5th voice mail extension Abrdg-appr Extn 4th voice mail extensionAbrdg-appr Extn 7th voice mail extension Every third remaining voice mail extensionEnter CORVector Definition Options for Call Vector Avaya Definity Gx/PBXLink Integration Guide for Cisco Unity To set up user phones To Update the PBXLink Box Firmware Setting up the PBXLink BoxClick PBXLinkFirmwareUpdate Select Configuration and press Enter To set up the PBXLink boxTo set up the port LTNs for three PBXLink digital ports To set up the port LTNs for two PBXLink digital portsLTN Number Voice Messaging Port Value 0007 Switch Parameter Required Setting Configuring Cisco Unity for the IntegrationTo confirm that the integration is enabled Go to System Licensing Licensed FeaturesTo Set Up the Test Configuration Testing the IntegrationTo Test an Internal Call with Release Transfer To Test an External Call with Release TransferTo Return Example Subscriber to the Default Settings To Set Up Supervised Transfer on Cisco UnityTo Test Supervised Transfer Requirements Integrating a Secondary Server for Cisco Unity FailoverTo Set Up the Secondary Server for Failover Setting Up the Secondary Server for FailoverIntegration Description Dual Phone System Integration Overview Integration Steps When No Phone Systems Are InstalledReinstall the TSP. See the To Reinstall the TSP procedure on Changing Cisco Unity Administrator Settings Go to System Switch IP Switch To specify switch settings for Cisco CallManagerTo Modify Voice Port Settings Page To Remove the Existing TSP Changing the Number of Installed PortsSetting Up Cisco Unity to Remap Extension Numbers About the Remapping FeatureTo Reinstall the TSP To Remap Extension Numbers Wildcard Syntax and ExamplesRule Original Number New Number To Set the Port Assignments in the Registry Ctrl-Alt-Delete System Configuration SettingsConventions Convention DescriptionCisco.com Obtaining DocumentationDocumentation DVD Cisco Product Security Overview Documentation FeedbackOrdering Documentation Obtaining Technical Assistance Reporting Security Problems in Cisco ProductsCisco Technical Support Website Definitions of Service Request Severity Submitting a Service RequestObtaining Additional Publications and Information