Cisco Systems Cisco Unity 3.1 manual Requirements, Phone System, Cisco Unity Server

Page 2

Avaya Definity Gx/PBXLink Integration Guide for Cisco Unity 3.1

Requirements

Requirements

The Avaya Definity/PBXLink integration supports configurations of the following components:

Phone System

•An Avaya Definity phone system with one or two digital lines connected to the PBX ports on the PBXLink box. The line or lines must be compatible with the 7434D or 8434D digital phones. If vectoring will be used and depending on the phone system, the line or lines may require compatibility with only the 7434D digital phone.

•Bridged mode feature, enabled.

•For each voice messaging port, one analog port connected to the voice cards in the Cisco Unity server.

•The SMDI port in the PBXLink box connected to a serial port (COM1 is the default) on the Cisco Unity server with an RS-232 serial cable. If multiple PBXLink boxes are installed, the SMDI port of the last PBXLink box is connected to the Management port of the first PBXLink box with an RS-232 serial cable. The SMDI port of the first PBXLink box is connected to a serial port (COM1 is the default) on the Cisco Unity server with another RS-232 serial cable. Make sure that the serial protocol parameters for the Management port of the first PBXLink box are set to the same values as the SMDI port. We recommend that the serial cables have the following construction for the serial cable:

–A maximum of 50 feet (15.24 m) in length

–24 AWG stranded conductors

–Low capacitance—for example, no more than 12 pF/ft (39.4 pF/m) between conductors

–At least 65 percent braided shield over aluminized polymer sleeve around conductors

–UL-recognized overall cable jacket insulation with low dielectric constant

–Braided shield fully terminated to and enclosed by a metal connector backshell

–Gold-plated connector contacts

•The phone system ready for the integration as described in the installation guide for the phone system.

Cisco Unity Server

•The applicable voice cards, installed. For details on supported voice cards, refer to Cisco Unity System Requirements, and Supported Hardware and Software, available on Cisco.com at http://www.cisco.com/en/US/products/sw/voicesw/ps2237/prod_pre_installation_guides_list.html.

•Cisco Unity installed and ready for the integration, as described in the Cisco Unity Installation Guide.

•A system key that enables the integration and the appropriate number of voice messaging ports.

•An available serial port (COM1 is the default).

Avaya Definity Gx/PBXLink Integration Guide for Cisco Unity 3.1

2

OL-1846-06

 

 

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Integration Tasks Integration StepsCisco Unity Server RequirementsPhone System Configuration for 49 to 72 Ports Configuration for 24 or Fewer PortsConfiguration for 25 to 48 Ports Integration DescriptionPBXLink Box Connections Integration Features Number of Voice Messaging Ports to InstallProgramming the Avaya Definity/PBXLink Phone System Number of Voice Messaging Ports That Will Answer CallsOption Option SettingTo program the Avaya Definity/PBXLink phone system Normal Button Assignment SettingCall-appr Inspect Call-apprAbrdg-appr Extn 2nd voice mail extension Feature Button Number SettingAbrdg-appr Extn 1st voice mail extension Abrdg-appr Extn 3rd voice mail extensionEvery third remaining voice mail extension Abrdg-appr Extn 4th voice mail extensionAbrdg-appr Extn 7th voice mail extension Abrdg-appr Extn 5th voice mail extensionCOR EnterVector Definition Options for Call Vector Avaya Definity Gx/PBXLink Integration Guide for Cisco Unity To set up user phones Click PBXLinkFirmwareUpdate Setting up the PBXLink BoxTo Update the PBXLink Box Firmware To set up the PBXLink box Select Configuration and press EnterLTN Number Voice Messaging Port Value To set up the port LTNs for two PBXLink digital portsTo set up the port LTNs for three PBXLink digital ports 0007 Go to System Licensing Licensed Features Configuring Cisco Unity for the IntegrationTo confirm that the integration is enabled Switch Parameter Required SettingTesting the Integration To Set Up the Test ConfigurationTo Test an External Call with Release Transfer To Test an Internal Call with Release TransferTo Test Supervised Transfer To Set Up Supervised Transfer on Cisco UnityTo Return Example Subscriber to the Default Settings Integrating a Secondary Server for Cisco Unity Failover RequirementsIntegration Description Setting Up the Secondary Server for FailoverTo Set Up the Secondary Server for Failover Integration Steps When No Phone Systems Are Installed Dual Phone System Integration OverviewReinstall the TSP. See the To Reinstall the TSP procedure on Changing Cisco Unity Administrator Settings To Modify Voice Port Settings To specify switch settings for Cisco CallManagerGo to System Switch IP Switch Page Changing the Number of Installed Ports To Remove the Existing TSPTo Reinstall the TSP About the Remapping FeatureSetting Up Cisco Unity to Remap Extension Numbers To Remap Extension Numbers Rule Original Number New Number Syntax and ExamplesWildcard To Set the Port Assignments in the Registry Convention Description System Configuration SettingsConventions Ctrl-Alt-DeleteDocumentation DVD Obtaining DocumentationCisco.com Ordering Documentation Documentation FeedbackCisco Product Security Overview Cisco Technical Support Website Reporting Security Problems in Cisco ProductsObtaining Technical Assistance Submitting a Service Request Definitions of Service Request SeverityObtaining Additional Publications and Information
Top Page Image Contents