Maytag MAH-1 Be sure the door is tightly closed, Press the start/pause pad, See Interior Cleaning

BEFORE YOU CALL CONT.

CHECK THESE POINTS IF YOUR MAYTAG NEPTUNE® WASHER...

	• Be sure the door is tightly closed.
	• Plug cord into a live electrical outlet. (Tub light should illuminate).
	• Check fuse or reset circuit breaker.
Won’t Fill	• Press the start/pause pad.
	• Turn both faucets on fully.
	•	Straighten inlet hoses.
	• Disconnect hoses and clean screens. Hose filter screens may be plugged.
	• Open and close the door, then push the start/pause pad.
	• Check fuse or reset circuit breaker.
Won’t Tumble	•	Close the door and press the start/pause pad. For your safety, the clothes washer will not
		tumble or spin unless the door is closed.
Door Locked Shut;	•	Press the start/pause pad to stop the machine.
Will Not Open	•	It may take a few moments for the door lock mechanism to disengage.
Freshening	• See Interior Cleaning, page 8.
Your Washer
	• Clothes washer should be leveled properly as outlined in installation instructions.
Is Noisy	• Check that the leveling leg lock nuts are tightened.
	•	Be sure rubber feet are installed on leveling legs.
	• Weak floors can cause vibration and walking.
	•	For information on normal operating sounds, see page 13.

For further assistance, call Maytag Customer Service toll-free at 1-888-4-MAYTAG (1-888-462-9824).

U.S. customers using TTY for deaf, hearing impaired or speech impaired, call 1-800-688-2080.

11