To change the drying settings, Timed Cycles

5. Adjust cycle modifiers, if desired				7. Press START/PAUSE to begin cycle

Steam model shown

You may adjust different settings, depending on whether you have selected a Sensor Cycle, Timed Cycle, or Steam Cycle. See the “Cycle Guide” for detailed information.

NOTE: Not all options and settings are available with all cycles. Not all cycles are on all models.

Sensor Cycles:

You can select a different Dryness Level, depending on your load, by pressing the Dryness Level button. Selecting Very, More, Normal, Less, or Damp automatically adjusts the Dryness Level at which the dryer will shut off. Once the Dryness Level is set,

it cannot be changed without stopping the cycle.

Sensor cycles give the best drying in the shortest time. Drying time varies based on fabric type, load size, and dryness setting.

Timed Cycles:

When you select a Timed Cycle, the default time appears in the display. Use the + and - buttons to increase or decrease the time in 1 minute increments. Press and hold to change the time in 5 minute increments.

The default temperature may be changed by pressing the Temp Level button until the desired dry temperature is lit.

Steam Cycles:

Auto Refresh with Steam:

Reduces odors and light wrinkles from small to medium-sized loads of dry items. Dry time will automatically adjust when the load size is sensed. Medium or High Temp Levels may be selected.

Custom Refresh with Steam:

This cycle is best for reducing wrinkles and odors from dry garments. Select the number of garments to be refreshed. Cycle time will increase depending on number of garments selected.

6. Select any additional options

Steam model shown

Add additional options such as Reduce Static, Wrinkle Prevent, Wrinkle Prevent with Steam and/or Steam Boost by pressing the button for that option.

NOTE: Not all options and settings are available with all cycles.

Press and hold the START/PAUSE button to begin the cycle.

8. Remove items promptly after cycle is finished

Steam model shown

Promptly remove items after
cycle has completed to reduce
wrinkling. If you will be unable
to remove the load promptly,		Non-steam
select the Wrinkle Prevent/	Steam model
		model
Wrinkle Prevent with Steam

option before pressing Start/Pause.

Changing the Sensor Cycle settings to increase drying time

If all your loads on all Sensor Cycles are consistently not as dry as you would like or are too dry, you may change the default settings to increase or decrease the default dryness level.

Your sensor drying settings can be adjusted to adapt to different installations, environmental conditions or personal preference. This change is retained and will affect all of your sensor cycles, not just the current cycle/load.

There are 5 drying settings, they will appear in the time display:

01Factory preset dryness level.

02Slightly drier clothes, 15% more drying time.

03Much drier clothes, 30% more drying time.

04Much damper clothes, 30% less drying time.

05Slightly damper clothes, 15% less drying time.