Gefen EXT-IP-2-RS2322 user manual Using the built-in Web Interface, Help

Page 63

Advanced Operation

Web Interface

Using the built-in Web Interface

Access the built-in Web interface by entering the IP address of the IP to 2 x RS-232 Converter that was specified in step 3 under Configuration using RS-232 (page 9).

The built-in Web interface is divided into three pages: RS-232, Network, and System. Each main page is represented by a tab at the top of the screen. The RS-232 page will always be displayed first.

Help

Click the Help button to display context-sensitive help for the current page. The help window can be moved to any position within the Web browser window.

page 53

Image 63

Contents

IP to RS-232 Important Safety Instructions Warranty Information Contacting Gefen Technical Support Web site Operating NotesFeatures and Packing List FeaturesPacking List Vii Table of Contents Page Page Getting Started Introduction IP to 2xRS-232 ConverterIntroduction Installation Sample Wiring DiagramConnection Instructions Page Page Advanced Operation Configuration using the Gefen Discovery Tool RS-232 and IP ConfigurationDiagram 2.1 Configuration using a null-modem cable Configuration using RS-232Information Commands Commands Example #helpAdvanced Operation #setadddelim #setdevicedescr #setenddel #setgateway #sethttpport #setipadd #setnetmask #setsendbytecnt #setsendtimeout #setserialdescr #setserialmode #setserialparams Baud Rate = 19200 Bps Line Delay = 1000 ms #setstartdel #settcpbrport #settcptermport #settelnetpass #setudpbrport #setudpechobr #setudpport #setudpremotebr #setudprip #setudprport #showdelprms #showdevicedescr #showipconfig #showme #showserialdescr #showserialmode #showserialparams #showtelnetpass #showverdata Param1 Value #systemwidereset#usediscovery #usetcpaccess #usetcptermpass #useudpaccess #useudpecho Using the built-in Web Interface Web InterfaceHelp Description RS-232 ModeRS-232 Select RS-232 PortStop Bits Baud RateData Bits ParityLine Delay ms Force Send msForce Send bytes Use End Delimiter Add Delimiters to data sentUse Start Delimiter Start Delimiter ValueEnd Delimiter Value TCP PortUDP Local Port UDP Echo Set DefaultsDestination IP Destination PortIP Address Network tabMAC Address ModeHttp Port GatewayUser Name Enable TCP AccessRequire Password on Connect Old PasswordNew Password Confirm PasswordTerminal Port Enable UDP Access Enable UDP EchoUDP Port Enable Discovery Destination UDP IP AddressDestination UDP Port System tab Download Download Current ConfigurationBrowse... Restore Configuration RestoreReset Browse... Firmware UpdateUpdate Factory ResetPage Appendix RS-232 Settings Default SettingsNetwork IP SettingsConnectors, Indicators, and Controls RS-232 SpecificationsPage Nordhoff St., Chatsworth CA