Gefen EXT-IP-2-RS2322 user manual Commands

Command

Description

#help

Displays a list of all available commands

#set_add_delim

Enables or disables option to add delimiter to data

#set_device_descr

Sets the device description

#set_end_del

Sets the end frame delimiter

#set_gateway

Sets the gateway (router) IP address

#set_http_port

Sets the HTTP listening port of the IP to RS-232

Converter

#set_ipadd

Sets the IP address of the IP to RS-232 Converter

#set_netmask

Sets the subnet mask of the IP to RS-232 Converter

#set_send_byte_cnt

Sets the send-byte count value for bridging mode

#set_send_time_out

Sets the time-out value for sending data

#set_serial_descr

Assigns a description to the specified RS-232 port

#set_serial_mode

Sets the serial mode (TCP, UDP, or Terminal)

#set_serial_params

Assigns the settings to the specified RS-232 port

#set_start_del

Sets the Start Frame delimiter

#set_tcp_br_port

Sets the TCP bridge listening port

#set_tcp_term_port

Sets the TCP terminal listening port

#set_telnet_pass

Sets the TCP terminal password

#set_udp_br_port

Sets the UDP bridge listening port

#set_udp_echo_br

Enables or disables UDP bridge echo

#set_udp_port

Sets the UDP listening port

#set_udp_remote_br

Assigns the UDP bridge settings for the specified

RS-232 port

#set_udp_rip

Sets the remote UDP IP address

#set_udp_rport

Sets the UDP remote port

#show_del_prms

Dusplays the current delimiter parameters for the

specified serial port

#show_device_descr

Displays the device description

#show_ipconfig

Displays the current TCP/IP and UDP settings of the IP

to 2 x RS-232 Converter

#show_me

Enables or disables the flashing of the LED on the

device

#show_serial_descr

Displays the current description of the specified RS-232

port

#show_serial_mode

Displays the mode of the specified RS-232 port