"UniVert 2" inverter
6 Maintenance
Attention! Disconnect the unit from the power supply prior to all maintenance work. Always observe the safety instructions! (See chapter 1.)
The INV consists of
When visually inspecting the unit, check whether:
•there is any mechanical damage or foreign bodies are present,
•any conductive dirt or dust has accumulated in the unit, and whether
•accumulation of dust affects heat supply and dissipation.
If large quantities of dust have accumulated, the unit should as a precaution be cleaned with dry compressed air, in order to ensure adequate heat dissipation.
The intervals at which visual checks should be performed are largely determined by the site conditions. The unit must not be operated in an aggressive atmosphere.
Page 29 of 42 | 8000012364 BAL, en |