AEG 8000012364 BAL operating instructions UniVert 2 inverter

Page 35

"UniVert 2" inverter

Protection class	IP 20
Cooling	Forced air cooling
Intake air temperature	At rated current 0°C to 45°C,
	measured below the SBS
Storage temperature	-20°C to +70°C
Ambient conditions	IEC 721 Part 3-3 Class 3K3 / 3Z1 /
	3B1 / 3C2 / 3S2 / 3M3
Site altitude	Up to 2000 m above sea level
Mechanical stability
and vibration resistance	In acc. with VDE 0160
	Version 5.88 Item 7.2.2
Surface painted with	RAL 7032 (front panel)
Dimensions (W x H x D)	483 x 174 x 400 mm
	(19" x 4 height modules)
Weight	Approx. 13.5 kg
Noise generation	< 50 dB(A)
Connection system
X1 AC mains input:	Screw terminal 10 ...	25 mm2
X2 AC output:	Screw terminal 10 ...	25 mm2
X4 remote signals:	Screw terminal 0.2 ...	2.5 mm2
PE conductor:	M4 thread
X6 CAN bus interface	10-pin socket connector with
	insulation displacement
	connection system
	in acc. with DIN 41651
X7 CAN bus interface	16-pin socket connector with
	insulation displacement
	connection system
	in acc. with DIN 41651

Page 35 of 42

8000012364 BAL, en

Image 35

Contents Operating Instructions UniVert 2 inverter and SBS option Handling WarrantyDuty to Provide Information ValidityCopyright AbbreviationsHotline Table of Contents Dimensional Drawing Maintenance TroubleshootingTechnical Data Accident Prevention Regulations Safety InstructionsImportant Instructions and Explanations Qualified Personnel Application Safety AwarenessDirectives LiabilitySystem Description General InformationIndividual or parallel operation with SBS Function of the SystemIndividual INV operation Parallel INV operationParallel INV operation Description of the INV Block diagram of the inverterPrinciple of Operation of the INV, Electrical SBS Description of the SBSPrinciple of Operation of the SBS, Electrical Function of the Inverter S2.1 S2.2 S2.3 ON/OFF SwitchDIL Switch Can Bus Interfaces X6S2.4 S2.5 S2.6 Address Switches S2.4, S2.5 and S2.6 Own Address INVSwitches S2.7 and S2.8 Number of redundant INVs INVs Settings must be the same on all INVs and the SBSDisplay Colour Operating status Signalling, Displays and Remote SignalsOperating Statuses Switchback AttemptsFunction of the SBS optional AC Mains Monitoring System Reset ButtonAC Mains Input AC BusbarS3.1 S3.2 S3.3 S3.7 S3.8 INVs Operating modes Assignment of the signal terminalsSwitchover without gap Switchover with gap Connection InstallationConnecting the Loads / DC / Mains Start-UpDisconnection Maintenance For systems with SBS additionally TroubleshootingOutput Voltage Deviation General Data INV Technical DataOperation FaultOvertemperature ϑ Collective faultGeneral Data SBS With safe isolation at UO ≤ 60 V DC UniVert 2 inverter Electrical Data At 24 Type E-number G110 E230/10,9/2rfg-CFp2,5 3000000263 Type E-number E230 E230/115/2-VFp26,5-8 3000000646 Inverter dimensions type 1.5 and 3.3 kVA Dimensional DrawingInverter dimensions type 2.5 kVA SBS dimensions