Korg D8 manual Inserting a blank space into the track data Insert Track, Ins¿Tr 1?, Ers¿Tr 1?

Page 30

3.Inserting a blank space into the track data (Insert Track)

This operation inserts a blank space into the speci- fied area (IN–OUT) of a recorded track. When the blank is inserted, the original data will be moved toward the end of the song to make room for the blank. A blank can be inserted into a single track, or into multiple tracks at once. If you wish to add phrases to the middle of previously recorded data, use this operation to insert a blank space of the appropriate length, and then record onto that area.

■Inserting a blank space into the IN–OUT area of a track

As an example, here’s how to insert a blank space into the IN–OUT area of track 1.

1As described in “1. Storing IN, OUT and TO loca- tions”, store the IN and OUT locations.

2Press the [EDIT] key, and then press the [SONG/ TRACK] key several times to access the “Edit- Track” display.

EditTrackú

EDIT

SONG /

TRACK

 

3Press the [ ] key, and then press the [SONG/ TRACK] key several times to access the “Ins” dis- play.

Ins¿Tr 1?

4Rotate the [VALUE] dial to set the destination track (the track into which the blank space will be inserted) to 1.

5Make sure that you have made the correct settings. If you are sure that you wish to execute the Insert

Blank Space operation, press and hold the [ ] key for approximately one second. When the blank space has been inserted, the display will indicate “Completed”.

6Move to the IN location, and playback to check that the blank space was inserted correctly. If it was inserted into the wrong location, press the [UNDO] key to return the data to the previous condition, and then perform the Insert Blank Space operation once again.

Example: Inserting a blank into the IN–OUT area of track 1

Destination track

1

2

 

3

 

4

5

6

 

(before execution)

 

IN

 

OUT

 

 

 

 

 

 

 

 

 

Destination track

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1

2

 

 

 

3

4

5

6

(after execution)

 

IN

 

OUT

 

 

 

 

 

 

 

 

 

4.Erasing data from a track (Erase Track)

This operation erases data from a specified area (IN–OUT) of a recorded track. Single tracks or mul- tiple tracks can be erased simultaneously. The erased area will be blank, and even if recorded data exists following the erased area, it will not be moved forward.

■Erasing data from the IN–OUT area of a track

As an example, we will show how to erase the IN– OUT area of track 1.

1As described in “1. Storing IN, OUT and TO loca- tions”, store the IN and OUT locations.

2Press the [EDIT] key, and then press the [SONG/ TRACK] key several times to access the “Edit- Track” display.

EditTrackú

EDIT

SONG /

TRACK

 

3Press the [ ] key, and then press the [SONG/ TRACK] key several times to access the “Ers” dis- play.

Ers¿Tr 1?

4Rotate the [VALUE] dial to set the destination track (the track from which data will be erased) to 1.

5Make sure that you have made the correct settings. If you are sure that you wish to execute the Erase

Track operation, press and hold the [ ] key for approximately one second. When the data has been erased, the display will indicate “Com-

pleted”. Press the [ ] key to restore the previous display.

6Move to the IN location, and playback to check that the data was erased correctly. If the wrong data was erased, press the [UNDO] key to return the data to the previous condition, and then per- form the Erase Track operation once again.

Example: Erasing the data from the IN–OUT area of track 1

Destination track

1

2

 

3

4

 

5

6

(before execution)

 

 

IN

 

OUT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Destination track

 

 

 

 

 

 

 

 

1

2

 

 

 

 

5

6

(after execution)

 

 

IN

 

OUT

 

 

 

 

 

 

Chapter 2

Operation

 

 

Song editing

33

Page 29 Page 31
Image 30
Page 29 Page 31
Contents Page Table of Contents Synchronization and control with a Midi Adjusting and storing mixer settingsMoving and storing time locations Saving to and loading from DATOperation Power on/off Connections, Power-on, DemoConnections to your audio system etc Listening to the demo songs Turning the power onTurning the power off 01ScukyllCreating a new song Naming a songCreating and selecting songs 03KORG1 Connecting the input device and adjusting the levelRecording analog record- ing Starting and stopping recordingRecording digital recording Using EQ to modify the tone as you recordAdjusting the EQ BackEditing the effect Selecting the location at which the effect will be insertedSelecting the effect program Saving the effect programSending the input sound to the effect Master Send TypeApplying the dedicated delay to the input sound Turning the monitor delay on/offEditing the monitor delay Select the playback/recording tracks Select the input monitorMonAuto Redo Auto Punch In/OutUndo Storing the in and OUT timesAuto punch in/out setting PstRol02MRehearsing auto punch in/out Playback track and recording track settings Combining multiple tracks into one or two tracks BounceAdjusting the playback level and recording level Applying EQ and effects while you recordListening to the metro- nome while you record Trigger recording PlaybackApplying an effect to the playback sound Selecting the tracks for playbackSending the playback sound to the external effect Moving and storing time locations Switching scenes dur- ing playbackProgram playback of songs Moving the current timeFinding a precise time location Locate points LOC1, LOC2, LOC3MarkùM001 Mark pointsStoring a Mark point Moving to a Mark pointPairing on/off Pairing settingsAdjusting the volume of each channel Enabling parameters for pairingAdjusting the Effect Send, AUX Send and Track Status Adjusting the stereo locationUsing the EQ to adjust the tone Adjusting the High EQStoring a scene Switching scenes during a songScene Recalling a sceneRecording a master tape Mixdown Applying an effect dur- ing mixdownEditTrackú Storing IN, OUT and to timesCopying track data Track Copy CpyTr 1 ¿¿TrCLP Ï CpyTrCLPÏ¿¿Tr 1x 1Ï Inserting a blank space into the IN-OUT area of a track Inserting a blank space into the track data Insert TrackErasing data from a track Erase Track Ins¿Tr 1?Del¿Tr 1? Deleting data from a track Delete TrackDeleting data from the IN-OUT area of a track Swapping the IN-OUT areas of two tracksMoving a song Song RecoverCopying a song Deleting a songCreating a tempo map Tempo map settingsRecording Midi Clock data from a sequencer Deleting a tempo mapRecording tap tempo Selecting the tempo sourceTo the D8 Using MTC to synchroUsing Midi Clock to synchronize a Midi sequencer to the D8 Nize a Midi sequencerRcvMMCo Ï Using MMC to control the D8 from a Midi sequencerConnecting an external drive DevID 01ÏInitializing and format- ting a drive Exchanging disks on a removable disk driveSaving a song on a removable disk drive Backup ARM 100 ¿ Restore ÏInsNextDsk A01SngNa¿¿HDAT100Ï Saving a song to a DAT recorder BackupBackup Ï ¿DATokÏHDAT100 ¿ Loading a backed-up song from a DAT recorder RestoreLoading a backed-up song from a DAT recorder Restore PlayDAT ÏReference P1 Song number/name display SONG/TRACKEdit SONG/TRACK Drive/song selectMovøI01okœ RenamA01œ SngName œDelI01okœ CpyI1-35ø øB06-40okœP3 Edit Track CpyTr ØTr 1x99œSystem Deleting a mark P2 MIDI/SYNC settingsEdit System Input 1/2 assignARM 100 œ Song backupDiskUtil œ Drive informationØBHD1300œ Song restoreRestore œ ARM 100 ø A01SngN ø ØB02NoDA Initialize/formatPlay Mode Display ModeREC Mode P1 Counter display selectionP2 Post roll time setting Edit Play ModeP1 Pre roll time setting TriggerP1 Tempo map settings P1 Threshold level adjustmentP2 Pre trigger time setting Edit TriggerEdit Tempo P2 Metronome volume settingP1 Tempo source setting MetronomeEdit Metronome P1 Metronome volume settingP2 Metronome mode setting 15. IN/LOC1, OUT/LOC2, TO/LOC3P1 Scene parameter list SceneEdit Scene P2 Deleting a sceneUndo StoreScrub P1 Storing IN/LOC 1, OUT/LOC 2, TO/LOC 3 or a SceneTrack Status 22. EQEffect Send Fader P2 External output Aux level settingPAN/BALANCE OffREC Select P1-1 Pairing on/offPair On/Off Snd1-2000P1 Effect select RD1...SE9 Factory Preset, U01...U65 User AreaEffect P1-1Effect program category number selectP2-1 Monitor delay on/off P2 Monitor delay settingsP2-3Monitor delay parameter settings 200msœLoG-15dBœ Edit EffectP1 Editing and saving an effect All Effo RenøRoomEffect Assign Edit Effect AssignTroubleshooting AppendicesMidi sequencer does not synchronize to the D8 Various messages Midi Implementation Chart Block Diagram Effect Assign = Input 1/2 Effect Program List Type EFFECT1 EFFECT2 EFFECT3 EFFECT4Effect Parameter List 4BEQ 4 Band EqualizerNR Noise Reduction Phono Turntable SIM Scukyll Express Metronome Type ListDemo Song List Moonlit sea written by Yuko AsaiD8 Specifications Functions added to the D8 Bouncing tracks
Top Page Image Contents