Korg D8 manual Trigger recording, Playback

Page 19

12. Trigger recording

You can use the input sound as a trigger that will start recording. The D8 will begin recording at the moment that sound is input.

■Connecting the input device and adjusting the level

1As explained in “■ Connecting the input device and adjusting the level” (p.11, p.12), specify the track to be recorded.

■Preparations for trigger recording

2Press the [TRIGGER] key to turn the Trigger func- tion on (indicator lit).

TRIGGER

E

3Move to the time location where you wish to begin recording.

4Press the [REC] key to enter record ready mode (indicator blinking).

■Begin trigger recording

5Begin playing. When the input exceeds the thresh- old level, recording will start.

If the Pre Trigger Time has been set to a value other than 000 mS, recording will begin at the specified time earlier than when triggering occurred, and any previously recorded sound during that inter- val will be erased (refer to p.53).

6When you finish your performance, press the [STOP] key to stop recording.

■Listening to the recorded performance (Play- back)

7Move the current time location to a point earlier than where you began recording. Then set the [TRACK STATUS] of the recorded track to PLAY, and press the [PLAY] key to playback. Press the [STOP] key to stop. (Refer to “■ Listening to the recorded performance (Playback)”, p.11)

■Adjusting the threshold level

If the location where recording begins is not appro- priate, you can change the settings of EDIT TRIG- GER P1 (refer to p.53) to adjust the input level which will start recording.

Playback

STEP4 This section explains the variety of play- back methods provided by the D8.

1. Playback

Here we will explain the basic method of playback. Refer also to the later section “Adjusting and regis- tering mixer settings”.

■Selecting the playback tracks

1Press the [TRACK STATUS] keys

for tracks which contain recorded

lit green

 

material, to select PLAY (indicator

1

lit green).

L

 

■Move the current time location to the begin- ning of the song

2Hold down the [STOP] key and press the [REW] key. If you wish to move to another location in the song, refer to “Moving the current time”.

■Starting and ending playback

3Press the [PLAY] key to begin playback (indicator lit).

4Press the [STOP] key to stop playback (the [PLAY] indicator will go off).

✧You can start/stop playback by pressing a foot switch <sold separately> (refer to p.47).

2.Playing a specified area of a song once or repeatedly

By using the “Auto Play function” which plays the IN–OUT area of the song once, or the “Auto Repeat function” which repeatedly plays back the IN–OUT area, you can playback a specified area. It is convenient to use these functions in conjunction with Auto Punch In/Out recording.

1Press the [TRACK STATUS] key several times for each track that you wish to playback, to select PLAY (indicator lit green).

2Store the IN and OUT locations of the desired area for playback. (Refer to “Locate points (LOC1, LOC2, LOC3)”, p.25)

3If you wish to playback the IN–OUT

area once, press the [PLAY MODE]

PLAY

MODE

key several times to make the “ ”

 

 

 

E

 

 

symbol appear in the display.

 

 

If you wish to repeatedly playback the IN–OUT area, press the [PLAY MODE] key several times to make the “” symbol appear in the display.

4When “ ” is displayed, pressing the [PLAY] key will cause the IN–OUT area to playback, and then

stop automatically.

When “” is displayed, pressing the [PLAY] key will cause the IN–OUT area to playback repeatedly. Playback will stop when you press the [STOP] key.

22

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Page Table of Contents Saving to and loading from DAT Adjusting and storing mixer settingsMoving and storing time locations Synchronization and control with a MidiOperation Connections, Power-on, Demo Power on/offConnections to your audio system etc 01Scukyll Turning the power onTurning the power off Listening to the demo songsNaming a song Creating a new songCreating and selecting songs Starting and stopping recording Connecting the input device and adjusting the levelRecording analog record- ing 03KORG1Back Using EQ to modify the tone as you recordAdjusting the EQ Recording digital recordingSaving the effect program Selecting the location at which the effect will be insertedSelecting the effect program Editing the effectMaster Send Type Sending the input sound to the effectTurning the monitor delay on/off Applying the dedicated delay to the input soundEditing the monitor delay Select the input monitor Select the playback/recording tracksMonAuto Storing the in and OUT times Auto Punch In/OutUndo RedoPstRol02M Auto punch in/out settingRehearsing auto punch in/out Combining multiple tracks into one or two tracks Bounce Playback track and recording track settingsApplying EQ and effects while you record Adjusting the playback level and recording levelListening to the metro- nome while you record Playback Trigger recordingSelecting the tracks for playback Applying an effect to the playback soundSending the playback sound to the external effect Moving the current time Switching scenes dur- ing playbackProgram playback of songs Moving and storing time locationsLocate points LOC1, LOC2, LOC3 Finding a precise time locationMoving to a Mark point Mark pointsStoring a Mark point MarkùM001Enabling parameters for pairing Pairing settingsAdjusting the volume of each channel Pairing on/offAdjusting the High EQ Adjusting the stereo locationUsing the EQ to adjust the tone Adjusting the Effect Send, AUX Send and Track StatusRecalling a scene Switching scenes during a songScene Storing a sceneApplying an effect dur- ing mixdown Recording a master tape MixdownCpyTr 1 ¿ Storing IN, OUT and to timesCopying track data Track Copy EditTrackúCpyTrCLPÏ¿ ¿TrCLP Ï¿Tr 1x 1Ï Ins¿Tr 1? Inserting a blank space into the track data Insert TrackErasing data from a track Erase Track Inserting a blank space into the IN-OUT area of a trackSwapping the IN-OUT areas of two tracks Deleting data from a track Delete TrackDeleting data from the IN-OUT area of a track Del¿Tr 1?Deleting a song Song RecoverCopying a song Moving a songDeleting a tempo map Tempo map settingsRecording Midi Clock data from a sequencer Creating a tempo mapSelecting the tempo source Recording tap tempoNize a Midi sequencer Using MTC to synchroUsing Midi Clock to synchronize a Midi sequencer to the D8 To the D8DevID 01Ï Using MMC to control the D8 from a Midi sequencerConnecting an external drive RcvMMCo ÏExchanging disks on a removable disk drive Initializing and format- ting a driveSaving a song on a removable disk drive Backup A01SngNa¿ Restore ÏInsNextDsk ARM 100 ¿¿DATokÏ Saving a song to a DAT recorder BackupBackup Ï ¿HDAT100ÏPlayDAT Ï Loading a backed-up song from a DAT recorder RestoreLoading a backed-up song from a DAT recorder Restore HDAT100 ¿Reference Drive/song select SONG/TRACKEdit SONG/TRACK P1 Song number/name displayCpyI1-35ø øB06-40okœ RenamA01œ SngName œDelI01okœ MovøI01okœCpyTr ØTr 1x99œ P3 Edit TrackSystem Input 1/2 assign P2 MIDI/SYNC settingsEdit System Deleting a markDrive information Song backupDiskUtil œ ARM 100 œInitialize/format Song restoreRestore œ ARM 100 ø A01SngN ø ØB02NoDA ØBHD1300œP1 Counter display selection Display ModeREC Mode Play ModeTrigger Edit Play ModeP1 Pre roll time setting P2 Post roll time settingEdit Trigger P1 Threshold level adjustmentP2 Pre trigger time setting P1 Tempo map settingsMetronome P2 Metronome volume settingP1 Tempo source setting Edit Tempo15. IN/LOC1, OUT/LOC2, TO/LOC3 P1 Metronome volume settingP2 Metronome mode setting Edit MetronomeP2 Deleting a scene SceneEdit Scene P1 Scene parameter listP1 Storing IN/LOC 1, OUT/LOC 2, TO/LOC 3 or a Scene StoreScrub Undo22. EQ Track StatusEffect Send Off P2 External output Aux level settingPAN/BALANCE FaderSnd1-2000 P1-1 Pairing on/offPair On/Off REC SelectP1-1Effect program category number select RD1...SE9 Factory Preset, U01...U65 User AreaEffect P1 Effect select200msœ P2 Monitor delay settingsP2-3Monitor delay parameter settings P2-1 Monitor delay on/offAll Effo RenøRoom Edit EffectP1 Editing and saving an effect LoG-15dBœEdit Effect Assign Effect AssignAppendices TroubleshootingMidi sequencer does not synchronize to the D8 Various messages Midi Implementation Chart Block Diagram Effect Assign = Input 1/2 Type EFFECT1 EFFECT2 EFFECT3 EFFECT4 Effect Program List4BEQ 4 Band Equalizer Effect Parameter ListNR Noise Reduction Phono Turntable SIM Moonlit sea written by Yuko Asai Metronome Type ListDemo Song List Scukyll ExpressD8 Specifications Bouncing tracks Functions added to the D8
Top Page Image Contents