Korg D8 manual System

Page 46

3. SYSTEM

P1 Channel level meter display selection

1

ChMtr:Pre

P1-1Channel level meter display selection ..[Pre, Post]

Selects the location at which the channel level meter will display the volume level. These are the levels for channels 1–8.

Pre: The volume level before the EQ and fader of each channel will be displayed.

When inputting external audio sources, this lets you check the [TRIM] settings. During playback this lets you check whether or not each track contains audio.

Post: The volume level after the EQ and fader of each channel will be displayed.

This lets you view the volume level that is being out- put during playback, or the recording level for each track during recording.

P2 Effect level meter display selection

1

EfMtr:In

P2-1Effect level meter display selection

[In, Out]

Selects the location at which the channel level meter will display the volume level.

In: The input volume level to the effect will be shown. This lets you check the input level to the effect.

Out: The output volume level from the effect will be shown.

This lets you check the output level from the effect.

If the input is stereo or if multiple outputs are used, the louder of the L/R levels will be displayed.

P3 Input monitor selection

1

Mon:Auto

P3-1 Input monitor selection

[Auto, Source]

Specifies how the input monitor sound will be output.

Auto: For channels whose [TRACK STATUS] is REC, the track playback will be heard during playback, and the external input will be heard during recording (rehearsal) and when stopped.

However if [REC SELECT] is set to MASTER, you will always hear the playback tracks.

IN

OUT

 

 

 

 

Playback sound

Record

 

Playback sound

 

an external

 

 

input

 

 

 

 

 

 

(rehearsal)

Source: For channels whose [TRACK STATUS] is REC, the external input will always be heard.

P4 Foot switch operating mode selection

1

Fsw:PncI/O

P4-1Foot switch operating mode selection ..................

[PncI/O, PlyStp, Mark]

Selects the function of the foot switch.

PncI/O (Punch In/Out): The foot switch will start and stop manual punch in/out recording.

Set [TRACK STATUS] to REC for the track that you wish to record, and then begin playback. The moment you press the foot switch, recording will begin. Recording will end when you press the foot switch again.

PlyStp (Play/Stop): The foot switch will start and stop playback. Pressing the foot switch will start playback, and pressing it again will stop playback.

Mark: Stores a mark.

A mark will be stored when you press the foot switch.

When Tap Recording (refer to EDIT TEMPO P2) has begun, the foot switch will function as the tap marker regardless of the SYSTEM P4 setting.

P5 Foot switch polarity setting

1 2

FswPol *:-

P5-1

Foot switch polarity indicator

(✽, (Off))

P5-2

Foot switch polarity setting

[-, +]

This sets the polarity of the foot switch.

Adjust the setting so that the “✽” appears when you press the foot switch.

Chapter 3

Reference

 

 

 

 

47

Page 45 Page 47
Image 46
Page 45 Page 47
Contents Page Table of Contents Synchronization and control with a Midi Adjusting and storing mixer settingsMoving and storing time locations Saving to and loading from DATOperation Connections, Power-on, Demo Power on/offConnections to your audio system etc Listening to the demo songs Turning the power onTurning the power off 01ScukyllNaming a song Creating a new songCreating and selecting songs 03KORG1 Connecting the input device and adjusting the levelRecording analog record- ing Starting and stopping recordingRecording digital recording Using EQ to modify the tone as you recordAdjusting the EQ BackEditing the effect Selecting the location at which the effect will be insertedSelecting the effect program Saving the effect programSending the input sound to the effect Master Send TypeTurning the monitor delay on/off Applying the dedicated delay to the input soundEditing the monitor delay Select the input monitor Select the playback/recording tracksMonAuto Redo Auto Punch In/OutUndo Storing the in and OUT timesPstRol02M Auto punch in/out settingRehearsing auto punch in/out Playback track and recording track settings Combining multiple tracks into one or two tracks BounceAdjusting the playback level and recording level Applying EQ and effects while you recordListening to the metro- nome while you record Trigger recording PlaybackSelecting the tracks for playback Applying an effect to the playback soundSending the playback sound to the external effect Moving and storing time locations Switching scenes dur- ing playbackProgram playback of songs Moving the current timeFinding a precise time location Locate points LOC1, LOC2, LOC3MarkùM001 Mark pointsStoring a Mark point Moving to a Mark pointPairing on/off Pairing settingsAdjusting the volume of each channel Enabling parameters for pairingAdjusting the Effect Send, AUX Send and Track Status Adjusting the stereo locationUsing the EQ to adjust the tone Adjusting the High EQStoring a scene Switching scenes during a songScene Recalling a sceneRecording a master tape Mixdown Applying an effect dur- ing mixdownEditTrackú Storing IN, OUT and to timesCopying track data Track Copy CpyTr 1 ¿CpyTrCLPÏ¿ ¿TrCLP Ï¿Tr 1x 1Ï Inserting a blank space into the IN-OUT area of a track Inserting a blank space into the track data Insert TrackErasing data from a track Erase Track Ins¿Tr 1?Del¿Tr 1? Deleting data from a track Delete TrackDeleting data from the IN-OUT area of a track Swapping the IN-OUT areas of two tracksMoving a song Song RecoverCopying a song Deleting a songCreating a tempo map Tempo map settingsRecording Midi Clock data from a sequencer Deleting a tempo mapRecording tap tempo Selecting the tempo sourceTo the D8 Using MTC to synchroUsing Midi Clock to synchronize a Midi sequencer to the D8 Nize a Midi sequencerRcvMMCo Ï Using MMC to control the D8 from a Midi sequencerConnecting an external drive DevID 01ÏInitializing and format- ting a drive Exchanging disks on a removable disk driveSaving a song on a removable disk drive Backup ARM 100 ¿ Restore ÏInsNextDsk A01SngNa¿¿HDAT100Ï Saving a song to a DAT recorder BackupBackup Ï ¿DATokÏHDAT100 ¿ Loading a backed-up song from a DAT recorder RestoreLoading a backed-up song from a DAT recorder Restore PlayDAT ÏReference P1 Song number/name display SONG/TRACKEdit SONG/TRACK Drive/song selectMovøI01okœ RenamA01œ SngName œDelI01okœ CpyI1-35ø øB06-40okœP3 Edit Track CpyTr ØTr 1x99œSystem Deleting a mark P2 MIDI/SYNC settingsEdit System Input 1/2 assignARM 100 œ Song backupDiskUtil œ Drive informationØBHD1300œ Song restoreRestore œ ARM 100 ø A01SngN ø ØB02NoDA Initialize/formatPlay Mode Display ModeREC Mode P1 Counter display selectionP2 Post roll time setting Edit Play ModeP1 Pre roll time setting TriggerP1 Tempo map settings P1 Threshold level adjustmentP2 Pre trigger time setting Edit TriggerEdit Tempo P2 Metronome volume settingP1 Tempo source setting MetronomeEdit Metronome P1 Metronome volume settingP2 Metronome mode setting 15. IN/LOC1, OUT/LOC2, TO/LOC3P1 Scene parameter list SceneEdit Scene P2 Deleting a sceneUndo StoreScrub P1 Storing IN/LOC 1, OUT/LOC 2, TO/LOC 3 or a Scene22. EQ Track StatusEffect Send Fader P2 External output Aux level settingPAN/BALANCE OffREC Select P1-1 Pairing on/offPair On/Off Snd1-2000P1 Effect select RD1...SE9 Factory Preset, U01...U65 User AreaEffect P1-1Effect program category number selectP2-1 Monitor delay on/off P2 Monitor delay settingsP2-3Monitor delay parameter settings 200msœLoG-15dBœ Edit EffectP1 Editing and saving an effect All Effo RenøRoomEffect Assign Edit Effect AssignTroubleshooting AppendicesMidi sequencer does not synchronize to the D8 Various messages Midi Implementation Chart Block Diagram Effect Assign = Input 1/2 Effect Program List Type EFFECT1 EFFECT2 EFFECT3 EFFECT4Effect Parameter List 4BEQ 4 Band EqualizerNR Noise Reduction Phono Turntable SIM Scukyll Express Metronome Type ListDemo Song List Moonlit sea written by Yuko AsaiD8 Specifications Functions added to the D8 Bouncing tracks
Top Page Image Contents