Korg D8 manual Finding a precise time location, Locate points LOC1, LOC2, LOC3

Page 22

2.Finding a precise time location

If you wish to find the exact time location at which a sound begins, or when setting locate points or storing marks, you can use the Scrub function or the Play From/Play To functions to find and select time locations more accurately.

■The Scrub function

On the D8 you can perform Scrubbing just as on an open reel tape recorder. By rotating the [VALUE] dial you can playback the song to accurately find a desired moment in time. This is called the “Scrub” function.

1Set the [TRACK STATUS] to PLAY (indicator lit green) for the track that you wish to scrub.

2 Press the [SCRUB] key to turn on the Scrub function (indicator lit).

SCRUB

3Rotate the [VALUE] dial to find the precise location while you listen to the sound. The track will play- back linked with the movement of the [VALUE] dial.

At this time, the level meter will show the pre- fader volume level of each track.

When the dial is not moving, the volume level at that time will be displayed.

■Play From/Play To/Slow Play functions

1Set [TRACK STATUS] to PLAY (indicator lit green) for the track that you wish to scrub.

2Press the [SCRUB] key to turn on the Scrub func- tion (indicator lit).

3Press the [PLAY] key, and playback will occur from the current time for two seconds, and will then stop. Then you will automatically return to the location at which playback began (Play From).

Hold down the [STOP] key and press the [PLAY] key, and the sound will playback from approxi- mately two seconds before the current time, and will then stop (Play To).

Press the [FF] key, and the sound will playback from the current time at half-speed, and will stop and automatically return to the playback start loca-

tion when you press the [STOP] key (Slow Play).

PLAYSTOP

✧It is convenient to use the Scrub function or Slow Play to find the precise time, and then to use the Play From/Play To functions to verify that time location.

3.Locate points (LOC1, LOC2, LOC3)

You can store a specific time location, and then move instantly to that location at any time. For each song, you can store three “Locate” points, and also one hundred “Mark” points. In addition to being used to move instantly to a desired time, Locate points are also used as the in/out times for Auto Punch In/Out recording, and to specify the in/out/to times for track editing operations. (Refer to p.31)

■Storing a Locate point

Here’s how to use the Locate function to store the current time. A time that has been stored in this way is called a “Locate point”.

1Move the current time to the location that you wish to store. (Refer to “1. Moving the current time”, p.24)

2Press the [STORE] key to prepare to store the time. The display will indicate “Store”.

Store¿

STORE

3Press the key [IN/LOC 1], [OUT/LOC 2] or [TO/

LOC 3] for which you wish to store the current time. The display will indicate “Store→ ✽✽✽(store destination In, Out, To)”, and the current time will be stored to the key.

Release the key, and the previous page will reap- pear.

StoreùIn

IN /

OUT /

TO /

 

LOC 1

LOC 2

LOC 3

Storing during playback or recording

While you are playing or recording a song, you can use the above steps 2 and following to store a locate point. The time location at the moment that you press the [IN/LOC 1], [OUT/LOC 2] or [TO/ LOC 3] key will be stored.

■Moving to a Locate point

✧When you press a [IN/LOC 1], [OUT/LOC 2] or [TO/LOC 3] key that you have previously stored, you will move to the stored time.

IN /

OUT /

TO /

LOC 1

LOC 2

LOC 3

Chapter 2

Operation

 

 

Adjusting and stor- ing mixer settings

25

Page 21 Page 23
Image 22
Page 21 Page 23
Contents Page Table of Contents Synchronization and control with a Midi Adjusting and storing mixer settingsMoving and storing time locations Saving to and loading from DATOperation Connections, Power-on, Demo Power on/offConnections to your audio system etc Listening to the demo songs Turning the power onTurning the power off 01ScukyllNaming a song Creating a new songCreating and selecting songs 03KORG1 Connecting the input device and adjusting the levelRecording analog record- ing Starting and stopping recordingRecording digital recording Using EQ to modify the tone as you recordAdjusting the EQ BackEditing the effect Selecting the location at which the effect will be insertedSelecting the effect program Saving the effect programSending the input sound to the effect Master Send TypeTurning the monitor delay on/off Applying the dedicated delay to the input soundEditing the monitor delay Select the input monitor Select the playback/recording tracksMonAuto Redo Auto Punch In/OutUndo Storing the in and OUT timesPstRol02M Auto punch in/out settingRehearsing auto punch in/out Playback track and recording track settings Combining multiple tracks into one or two tracks BounceAdjusting the playback level and recording level Applying EQ and effects while you recordListening to the metro- nome while you record Trigger recording PlaybackSelecting the tracks for playback Applying an effect to the playback soundSending the playback sound to the external effect Moving and storing time locations Switching scenes dur- ing playbackProgram playback of songs Moving the current timeFinding a precise time location Locate points LOC1, LOC2, LOC3MarkùM001 Mark pointsStoring a Mark point Moving to a Mark pointPairing on/off Pairing settingsAdjusting the volume of each channel Enabling parameters for pairingAdjusting the Effect Send, AUX Send and Track Status Adjusting the stereo locationUsing the EQ to adjust the tone Adjusting the High EQStoring a scene Switching scenes during a songScene Recalling a sceneRecording a master tape Mixdown Applying an effect dur- ing mixdownEditTrackú Storing IN, OUT and to timesCopying track data Track Copy CpyTr 1 ¿CpyTrCLPÏ¿ ¿TrCLP Ï¿Tr 1x 1Ï Inserting a blank space into the IN-OUT area of a track Inserting a blank space into the track data Insert TrackErasing data from a track Erase Track Ins¿Tr 1?Del¿Tr 1? Deleting data from a track Delete TrackDeleting data from the IN-OUT area of a track Swapping the IN-OUT areas of two tracksMoving a song Song RecoverCopying a song Deleting a songCreating a tempo map Tempo map settingsRecording Midi Clock data from a sequencer Deleting a tempo mapRecording tap tempo Selecting the tempo sourceTo the D8 Using MTC to synchroUsing Midi Clock to synchronize a Midi sequencer to the D8 Nize a Midi sequencerRcvMMCo Ï Using MMC to control the D8 from a Midi sequencerConnecting an external drive DevID 01ÏInitializing and format- ting a drive Exchanging disks on a removable disk driveSaving a song on a removable disk drive Backup ARM 100 ¿ Restore ÏInsNextDsk A01SngNa¿¿HDAT100Ï Saving a song to a DAT recorder BackupBackup Ï ¿DATokÏHDAT100 ¿ Loading a backed-up song from a DAT recorder RestoreLoading a backed-up song from a DAT recorder Restore PlayDAT ÏReference P1 Song number/name display SONG/TRACKEdit SONG/TRACK Drive/song selectMovøI01okœ RenamA01œ SngName œDelI01okœ CpyI1-35ø øB06-40okœP3 Edit Track CpyTr ØTr 1x99œSystem Deleting a mark P2 MIDI/SYNC settingsEdit System Input 1/2 assignARM 100 œ Song backupDiskUtil œ Drive informationØBHD1300œ Song restoreRestore œ ARM 100 ø A01SngN ø ØB02NoDA Initialize/formatPlay Mode Display ModeREC Mode P1 Counter display selectionP2 Post roll time setting Edit Play ModeP1 Pre roll time setting TriggerP1 Tempo map settings P1 Threshold level adjustmentP2 Pre trigger time setting Edit TriggerEdit Tempo P2 Metronome volume settingP1 Tempo source setting MetronomeEdit Metronome P1 Metronome volume settingP2 Metronome mode setting 15. IN/LOC1, OUT/LOC2, TO/LOC3P1 Scene parameter list SceneEdit Scene P2 Deleting a sceneUndo StoreScrub P1 Storing IN/LOC 1, OUT/LOC 2, TO/LOC 3 or a Scene22. EQ Track StatusEffect Send Fader P2 External output Aux level settingPAN/BALANCE OffREC Select P1-1 Pairing on/offPair On/Off Snd1-2000P1 Effect select RD1...SE9 Factory Preset, U01...U65 User AreaEffect P1-1Effect program category number selectP2-1 Monitor delay on/off P2 Monitor delay settingsP2-3Monitor delay parameter settings 200msœLoG-15dBœ Edit EffectP1 Editing and saving an effect All Effo RenøRoomEffect Assign Edit Effect AssignTroubleshooting AppendicesMidi sequencer does not synchronize to the D8 Various messages Midi Implementation Chart Block Diagram Effect Assign = Input 1/2 Effect Program List Type EFFECT1 EFFECT2 EFFECT3 EFFECT4Effect Parameter List 4BEQ 4 Band EqualizerNR Noise Reduction Phono Turntable SIM Scukyll Express Metronome Type ListDemo Song List Moonlit sea written by Yuko AsaiD8 Specifications Functions added to the D8 Bouncing tracks
Top Page Image Contents