Korg D8 Pair On/Off, REC Select, Snd1-2000, Input/recording source select, P1-1 Pairing on/off

Page 59

26. PAIR On/Off

P1-1 Pairing on/off

[On, Off]

Turns pairing on/off for the mixer channels.

Mixer settings of adjacent odd and even numbered channels (1-2, 3-4 and 5-6) can be linked so that changes to the setting of one channel will be simulta- neously reflected by the setting of other channel.

The following mixer settings can be pairing.

[TRACK STATUS] key, High EQ “HEQ”, Low EQ “LEQ”, Effect Send “Snd”, Aux send “Aux”, Balance ([PAN] knobs), and the channel volume level ([CHAN- NEL] faders).

For each of these parameters except for [TRACK STA- TUS] and [CHANNEL] fader, you can specify whether or not the parameter will be paired. (Refer to EDIT SYSTEM P3 “Channel pair enable setting”.)

✧Pairing can be switched on/off by simultaneously pressing the [EFFECT SEND] keys of the channels that you wish to pair.

“HEQ”, “LEQ”, “Snd” and “Aux” can be set from either the odd or even numbered channel.

In the case of the [CHANNEL] faders and [BALANCE (PAN)] knobs*, only the odd numbered channel of the pair can be set.

When pairing is On, the selected channel number for a setting such as EQ that is included in the pair will be displayed as “-” (e.g., HEQ1-2).

When pairing is Off, the selected channel number for settings such as EQ will be displayed normally (e.g., HEQ1).

*PAN will adjust the pan to the master bus if Pairing is Off, or the left/right balance to the master bus if Pairing is On.

1

Snd1-2:000

27. REC SELECT

Input/recording source select..............................................

[INPUT 1/2, INPUT 1/2+MASTER, MASTER, DIGITAL IN]

Selects the source for input and recording.

INPUT 1/2 (indicator lit): Select this when you wish to connect an external device such as a guitar, keyboard or mic to the INPUT 1/2 jacks for normal input or recording.

INPUT 1/2

MASTER

DIGITAL IN

REC

SELECT

INPUT 1/2+MASTER (both indicators lit): Select this when you wish to record the input from the bus master (bounce), or to record the input from an external device connected to the INPUT 1/2 jacks together with the other tracks.

INPUT 1/2

MASTER

DIGITAL IN

REC

SELECT

MASTER (indicator lit): Select this when you wish to record the input from the master bus, or when you wish to bounce all the playback sound of all eight tracks.

INPUT 1/2

MASTER

DIGITAL IN

REC

SELECT

DIGITAL IN (indicator lit): Select this when you wish to record from an external device such as a CD, MD or DAT that is connected to the DIGITAL IN connector.

In this case it will not be possible to use the internal effect or an external input from the AUX IN jacks.

INPUT 1/2

MASTER

DIGITAL IN

REC

SELECT

60

Page 58 Page 60
Image 59
Page 58 Page 60
Contents Page Table of Contents Saving to and loading from DAT Adjusting and storing mixer settingsMoving and storing time locations Synchronization and control with a MidiOperation Connections to your audio system etc Power on/offConnections, Power-on, Demo 01Scukyll Turning the power onTurning the power off Listening to the demo songsCreating and selecting songs Creating a new songNaming a song Starting and stopping recording Connecting the input device and adjusting the levelRecording analog record- ing 03KORG1Back Using EQ to modify the tone as you recordAdjusting the EQ Recording digital recordingSaving the effect program Selecting the location at which the effect will be insertedSelecting the effect program Editing the effectMaster Send Type Sending the input sound to the effectEditing the monitor delay Applying the dedicated delay to the input soundTurning the monitor delay on/off MonAuto Select the playback/recording tracksSelect the input monitor Storing the in and OUT times Auto Punch In/OutUndo RedoRehearsing auto punch in/out Auto punch in/out settingPstRol02M Combining multiple tracks into one or two tracks Bounce Playback track and recording track settingsApplying EQ and effects while you record Adjusting the playback level and recording levelListening to the metro- nome while you record Playback Trigger recordingSending the playback sound to the external effect Applying an effect to the playback soundSelecting the tracks for playback Moving the current time Switching scenes dur- ing playbackProgram playback of songs Moving and storing time locationsLocate points LOC1, LOC2, LOC3 Finding a precise time locationMoving to a Mark point Mark pointsStoring a Mark point MarkùM001Enabling parameters for pairing Pairing settingsAdjusting the volume of each channel Pairing on/offAdjusting the High EQ Adjusting the stereo locationUsing the EQ to adjust the tone Adjusting the Effect Send, AUX Send and Track StatusRecalling a scene Switching scenes during a songScene Storing a sceneApplying an effect dur- ing mixdown Recording a master tape MixdownCpyTr 1 ¿ Storing IN, OUT and to timesCopying track data Track Copy EditTrackú¿Tr 1x 1Ï ¿TrCLP ÏCpyTrCLPÏ¿ Ins¿Tr 1? Inserting a blank space into the track data Insert TrackErasing data from a track Erase Track Inserting a blank space into the IN-OUT area of a trackSwapping the IN-OUT areas of two tracks Deleting data from a track Delete TrackDeleting data from the IN-OUT area of a track Del¿Tr 1?Deleting a song Song RecoverCopying a song Moving a songDeleting a tempo map Tempo map settingsRecording Midi Clock data from a sequencer Creating a tempo mapSelecting the tempo source Recording tap tempoNize a Midi sequencer Using MTC to synchroUsing Midi Clock to synchronize a Midi sequencer to the D8 To the D8DevID 01Ï Using MMC to control the D8 from a Midi sequencerConnecting an external drive RcvMMCo ÏExchanging disks on a removable disk drive Initializing and format- ting a driveSaving a song on a removable disk drive Backup A01SngNa¿ Restore ÏInsNextDsk ARM 100 ¿¿DATokÏ Saving a song to a DAT recorder BackupBackup Ï ¿HDAT100ÏPlayDAT Ï Loading a backed-up song from a DAT recorder RestoreLoading a backed-up song from a DAT recorder Restore HDAT100 ¿Reference Drive/song select SONG/TRACKEdit SONG/TRACK P1 Song number/name displayCpyI1-35ø øB06-40okœ RenamA01œ SngName œDelI01okœ MovøI01okœCpyTr ØTr 1x99œ P3 Edit TrackSystem Input 1/2 assign P2 MIDI/SYNC settingsEdit System Deleting a markDrive information Song backupDiskUtil œ ARM 100 œInitialize/format Song restoreRestore œ ARM 100 ø A01SngN ø ØB02NoDA ØBHD1300œP1 Counter display selection Display ModeREC Mode Play ModeTrigger Edit Play ModeP1 Pre roll time setting P2 Post roll time settingEdit Trigger P1 Threshold level adjustmentP2 Pre trigger time setting P1 Tempo map settingsMetronome P2 Metronome volume settingP1 Tempo source setting Edit Tempo15. IN/LOC1, OUT/LOC2, TO/LOC3 P1 Metronome volume settingP2 Metronome mode setting Edit MetronomeP2 Deleting a scene SceneEdit Scene P1 Scene parameter listP1 Storing IN/LOC 1, OUT/LOC 2, TO/LOC 3 or a Scene StoreScrub UndoEffect Send Track Status22. EQ Off P2 External output Aux level settingPAN/BALANCE FaderSnd1-2000 P1-1 Pairing on/offPair On/Off REC SelectP1-1Effect program category number select RD1...SE9 Factory Preset, U01...U65 User AreaEffect P1 Effect select200msœ P2 Monitor delay settingsP2-3Monitor delay parameter settings P2-1 Monitor delay on/offAll Effo RenøRoom Edit EffectP1 Editing and saving an effect LoG-15dBœEdit Effect Assign Effect AssignAppendices TroubleshootingMidi sequencer does not synchronize to the D8 Various messages Midi Implementation Chart Block Diagram Effect Assign = Input 1/2 Type EFFECT1 EFFECT2 EFFECT3 EFFECT4 Effect Program List4BEQ 4 Band Equalizer Effect Parameter ListNR Noise Reduction Phono Turntable SIM Moonlit sea written by Yuko Asai Metronome Type ListDemo Song List Scukyll ExpressD8 Specifications Bouncing tracks Functions added to the D8
Top Page Image Contents