Korg D8 manual Initializing and format- ting a drive, Exchanging disks on a removable disk drive

Page 37

2.Turning the power on/ off when an external drive is connected

■Turning the power on

✧Turn on the power of the external drive(s), and then turn on the power of the D8.

■Turning the power off

✧When turning the power off, first turn off the power of the D8, and then turn off the power of the external drives.

However if the currently selected song is on a remov- able disk drive, turning off the power of the D8 when the disk is still in the drive will make it impossible to remove the disk even if you press the eject key of the removable disk drive. As necessary, remove the disk as follows before you turn off the power.

If the currently selected song is not on a removable disk drive, you can press the eject key of the removable disk drive to remove the disk.

1Press and hold the [ ] and [ ] keys to get the “Eject→ ✽?” display which asks whether you wish to eject a disk (✽ is the SCSI ID A–G of the drive).

Eject¿A ?

NO YES

2If you wish to eject the disk, press and hold the

[] key for approximately one second. The disk will be ejected, and the display will read “Next/ PwOff”, telling you that you may either insert the next disk or turn off the power.

Next/PwOff

3Turn off the power as described above (✧).

3.Initializing and format- ting a drive

Here’s how you can initialize or format a con- nected external drive. Select Initialize when you have purchased a drive or when you wish to com- pletely erase the contents of the drive. Select For- mat when you wish to use a disk that was previously used by another device, or when a Disk Error display begins to appear frequently during playback etc.

When you initialize or format, all data that had been saved on that disk will be lost. Before you ini- tialize or format, check to make sure that you actu- ally want to do this.

1Press the [EDIT] key, and then press the [SYSTEM] key several times to make the display read “Dis- kUtil”.

DiskUtil ú

EDITSYSTEM

E

2Press the [ ] key, and then press the [SYSTEM] key several times to make the display read “Ini- tial”.

Initial Ï

3Press the [ ] key, and then rotate the [VALUE] dial to select the drive number (SCSI ID A–G) that you wish to initialize or format. When you select a drive number, the drive type “HD” (hard disk) or “RM” (removable disk) will appear beside the drive number.

¿A:RM 100Ï

4If you are sure that you wish to initialize or format

the disk, press and hold the [ ] key for approxi- mately one second. While the operation is being executed, the display will indicate “Working”. When the operation is finished, the display will

indicate “Completed”. Press the [ ] key to restore the previous display.

4.Exchanging disks on a removable disk drive

■Exchanging disks on the currently selected removable disk drive

If the currently selected song is on a removable disk drive, use the following procedure to exchange disks.

1Press and hold the [ ] and [ ] keys to get the “Eject→ ✽?” display which asks whether you wish to eject a disk (✽ is the SCSI ID A–G of the drive).

Eject¿A ?

2Press and hold the [ ] key for approximately one second. The disk will be ejected, and the display will read “Next/PwOff”, telling you that you may either insert the next disk or turn off the power.

Next/PwOff

40

Page 36 Page 38
Image 37
Page 36 Page 38
Contents Page Table of Contents Moving and storing time locations Adjusting and storing mixer settingsSynchronization and control with a Midi Saving to and loading from DATOperation Connections, Power-on, Demo Power on/offConnections to your audio system etc Turning the power off Turning the power onListening to the demo songs 01ScukyllNaming a song Creating a new songCreating and selecting songs Recording analog record- ing Connecting the input device and adjusting the level03KORG1 Starting and stopping recordingAdjusting the EQ Using EQ to modify the tone as you recordRecording digital recording BackSelecting the effect program Selecting the location at which the effect will be insertedEditing the effect Saving the effect programMaster Send Type Sending the input sound to the effectTurning the monitor delay on/off Applying the dedicated delay to the input soundEditing the monitor delay Select the input monitor Select the playback/recording tracksMonAuto Undo Auto Punch In/OutRedo Storing the in and OUT timesPstRol02M Auto punch in/out settingRehearsing auto punch in/out Combining multiple tracks into one or two tracks Bounce Playback track and recording track settingsApplying EQ and effects while you record Adjusting the playback level and recording levelListening to the metro- nome while you record Playback Trigger recordingSelecting the tracks for playback Applying an effect to the playback soundSending the playback sound to the external effect Program playback of songs Switching scenes dur- ing playbackMoving and storing time locations Moving the current timeLocate points LOC1, LOC2, LOC3 Finding a precise time locationStoring a Mark point Mark pointsMarkùM001 Moving to a Mark pointAdjusting the volume of each channel Pairing settingsPairing on/off Enabling parameters for pairingUsing the EQ to adjust the tone Adjusting the stereo locationAdjusting the Effect Send, AUX Send and Track Status Adjusting the High EQScene Switching scenes during a songStoring a scene Recalling a sceneApplying an effect dur- ing mixdown Recording a master tape MixdownCopying track data Track Copy Storing IN, OUT and to timesEditTrackú CpyTr 1 ¿CpyTrCLPÏ¿ ¿TrCLP Ï¿Tr 1x 1Ï Erasing data from a track Erase Track Inserting a blank space into the track data Insert TrackInserting a blank space into the IN-OUT area of a track Ins¿Tr 1?Deleting data from the IN-OUT area of a track Deleting data from a track Delete TrackDel¿Tr 1? Swapping the IN-OUT areas of two tracksCopying a song Song RecoverMoving a song Deleting a songRecording Midi Clock data from a sequencer Tempo map settingsCreating a tempo map Deleting a tempo mapSelecting the tempo source Recording tap tempoUsing Midi Clock to synchronize a Midi sequencer to the D8 Using MTC to synchroTo the D8 Nize a Midi sequencerConnecting an external drive Using MMC to control the D8 from a Midi sequencerRcvMMCo Ï DevID 01ÏExchanging disks on a removable disk drive Initializing and format- ting a driveSaving a song on a removable disk drive Backup InsNextDsk Restore ÏARM 100 ¿ A01SngNa¿Backup Ï Saving a song to a DAT recorder Backup¿HDAT100Ï ¿DATokÏLoading a backed-up song from a DAT recorder Restore Loading a backed-up song from a DAT recorder RestoreHDAT100 ¿ PlayDAT ÏReference Edit SONG/TRACK SONG/TRACKP1 Song number/name display Drive/song selectDelI01okœ RenamA01œ SngName œMovøI01okœ CpyI1-35ø øB06-40okœCpyTr ØTr 1x99œ P3 Edit TrackSystem Edit System P2 MIDI/SYNC settingsDeleting a mark Input 1/2 assignDiskUtil œ Song backupARM 100 œ Drive informationRestore œ ARM 100 ø A01SngN ø ØB02NoDA Song restoreØBHD1300œ Initialize/formatREC Mode Display ModePlay Mode P1 Counter display selectionP1 Pre roll time setting Edit Play ModeP2 Post roll time setting TriggerP2 Pre trigger time setting P1 Threshold level adjustmentP1 Tempo map settings Edit TriggerP1 Tempo source setting P2 Metronome volume settingEdit Tempo MetronomeP2 Metronome mode setting P1 Metronome volume settingEdit Metronome 15. IN/LOC1, OUT/LOC2, TO/LOC3Edit Scene SceneP1 Scene parameter list P2 Deleting a sceneScrub StoreUndo P1 Storing IN/LOC 1, OUT/LOC 2, TO/LOC 3 or a Scene22. EQ Track StatusEffect Send PAN/BALANCE P2 External output Aux level settingFader OffPair On/Off P1-1 Pairing on/offREC Select Snd1-2000Effect RD1...SE9 Factory Preset, U01...U65 User AreaP1 Effect select P1-1Effect program category number selectP2-3Monitor delay parameter settings P2 Monitor delay settingsP2-1 Monitor delay on/off 200msœP1 Editing and saving an effect Edit EffectLoG-15dBœ All Effo RenøRoomEdit Effect Assign Effect AssignAppendices TroubleshootingMidi sequencer does not synchronize to the D8 Various messages Midi Implementation Chart Block Diagram Effect Assign = Input 1/2 Type EFFECT1 EFFECT2 EFFECT3 EFFECT4 Effect Program List4BEQ 4 Band Equalizer Effect Parameter ListNR Noise Reduction Phono Turntable SIM Demo Song List Metronome Type ListScukyll Express Moonlit sea written by Yuko AsaiD8 Specifications Bouncing tracks Functions added to the D8
Top Page Image Contents