Korg D8 manual Pan/Balance, Fader, P2 External output Aux level setting, Off

Page 58

P1-1Channel number display..................................

[1, 2, 3, 4, 5, 6, 1-2, 3-4, 5-6, 7-8]

This shows the currently selected channel number.

1-2, 3-4and 5-6will appear when Pairing is On (refer to PAIR On/Off).

P1-2Effect send level settings

[000...100, Wet]

Adjusts the send level to the internal effect (refer to EFFECT).

When [EFFECT ASSIGN] is INPUT 1/2

The send bus for all channels will automatically be turned off, and the audio signal from the INPUT 1/2 jacks will be sent to the effect.

When [EFFECT ASSIGN] is MASTER (Send Type)

000–100: Adjust the send level to the master effect.

Wet: All of the audio from the selected channel will be sent to the effect, and the Dry sound will not be sent to the master bus.

When [EFFECT ASSIGN] is MASTER (Global Type)

The send bus of each channel will automatically be turned off, and the sound of the master bus will be sent to the effect.

This setting can be paired (refer to PAIR On/Off) and stored in a scene (refer to SCENE).

P2 External output (Aux) level setting

Adjusts the level that is sent to AUX OUT (external output) from after the channel faders (post fader). Adjust this setting when you are using an external effect device.

When [REC SELECT] is set to DIGITAL IN, and [EFFECT ASSIGN] is set either to INPUT 1/2 or MAS- TER (Global Type), it is not possible to use AUX IN (external input).

1 2

Aux1 :000

P2-1Channel number display .................................

[1, 2, 3, 4, 5, 6, 1-2, 3-4, 5-6, 7-8]

This shows the currently selected channel number.

1-2, 3-4and 5-6will appear when Pairing is On (refer to PAIR On/Off).

P2-2External output (Aux) send level setting[000...100,

Off]

Adjusts the send level to AUX OUT.

This setting can be paired (refer to PAIR On/Off) and stored in a scene (refer to SCENE).

24. PAN/BALANCE

Here you can adjust the pan/balance of the stereo sig- nal sent from each channel to the master bus.

In the case of channels 1–6 for which pairing is Off (refer to PAIR On/Off), this will be the pan adjustment to the master bus.

In the case of channels (1–6) for which pairing is On and for channels 7/8, this will be the left/right balance adjustment to the master bus.

This setting can be paired (refer to PAIR On/Off) and stored in a scene (refer to SCENE).

25. FADER

Adjusts the volume level.

The recording level is adjusted by the channel faders when recording an external input (when [REC SELECT] is INPUT 1/2 or DIGITAL IN). When record- ing the master bus during track bouncing etc. ([REC SELECT] is MASTER), the recording level is adjusted by the master fader.

[CHANNEL] (1...7/8) faders (playback/input recording level adjustment)

Adjusts the volume of each track.

For channels whose [TRACK STATUS] is PLAY, adjust the playback level.

For channels whose [TRACK STATUS] is REC, adjust the input level or recording level of the signals from the INPUT 1/2 jacks or the DIGITAL IN jack.

[MASTER] fader

(master/master recording level adjustment)

Adjusts the volume level of the master bus.

This will determine the output volume of the OUTPUT L/R jacks and the DIGITAL OUT jack.

When [REC SELECT] is INPUT 1/2 or DIGITAL IN, this adjusts the volume level of the master bus.

When [REC SELECT] is MASTER, this adjusts the recording level for tracks whose [TRACK STATUS] is set to REC (ANALOG).

Chapter 3

Reference

 

 

 

 

59

Page 57 Page 59
Image 58
Page 57 Page 59
Contents Page Table of Contents Synchronization and control with a Midi Adjusting and storing mixer settingsMoving and storing time locations Saving to and loading from DATOperation Connections, Power-on, Demo Power on/offConnections to your audio system etc Listening to the demo songs Turning the power onTurning the power off 01ScukyllNaming a song Creating a new songCreating and selecting songs 03KORG1 Connecting the input device and adjusting the levelRecording analog record- ing Starting and stopping recordingRecording digital recording Using EQ to modify the tone as you recordAdjusting the EQ BackEditing the effect Selecting the location at which the effect will be insertedSelecting the effect program Saving the effect programSending the input sound to the effect Master Send TypeTurning the monitor delay on/off Applying the dedicated delay to the input soundEditing the monitor delay Select the input monitor Select the playback/recording tracksMonAuto Redo Auto Punch In/OutUndo Storing the in and OUT timesPstRol02M Auto punch in/out settingRehearsing auto punch in/out Playback track and recording track settings Combining multiple tracks into one or two tracks BounceAdjusting the playback level and recording level Applying EQ and effects while you recordListening to the metro- nome while you record Trigger recording PlaybackSelecting the tracks for playback Applying an effect to the playback soundSending the playback sound to the external effect Moving and storing time locations Switching scenes dur- ing playbackProgram playback of songs Moving the current timeFinding a precise time location Locate points LOC1, LOC2, LOC3MarkùM001 Mark pointsStoring a Mark point Moving to a Mark pointPairing on/off Pairing settingsAdjusting the volume of each channel Enabling parameters for pairingAdjusting the Effect Send, AUX Send and Track Status Adjusting the stereo locationUsing the EQ to adjust the tone Adjusting the High EQStoring a scene Switching scenes during a songScene Recalling a sceneRecording a master tape Mixdown Applying an effect dur- ing mixdownEditTrackú Storing IN, OUT and to timesCopying track data Track Copy CpyTr 1 ¿CpyTrCLPÏ¿ ¿TrCLP Ï¿Tr 1x 1Ï Inserting a blank space into the IN-OUT area of a track Inserting a blank space into the track data Insert TrackErasing data from a track Erase Track Ins¿Tr 1?Del¿Tr 1? Deleting data from a track Delete TrackDeleting data from the IN-OUT area of a track Swapping the IN-OUT areas of two tracksMoving a song Song RecoverCopying a song Deleting a songCreating a tempo map Tempo map settingsRecording Midi Clock data from a sequencer Deleting a tempo mapRecording tap tempo Selecting the tempo sourceTo the D8 Using MTC to synchroUsing Midi Clock to synchronize a Midi sequencer to the D8 Nize a Midi sequencerRcvMMCo Ï Using MMC to control the D8 from a Midi sequencerConnecting an external drive DevID 01ÏInitializing and format- ting a drive Exchanging disks on a removable disk driveSaving a song on a removable disk drive Backup ARM 100 ¿ Restore ÏInsNextDsk A01SngNa¿¿HDAT100Ï Saving a song to a DAT recorder BackupBackup Ï ¿DATokÏHDAT100 ¿ Loading a backed-up song from a DAT recorder RestoreLoading a backed-up song from a DAT recorder Restore PlayDAT ÏReference P1 Song number/name display SONG/TRACKEdit SONG/TRACK Drive/song selectMovøI01okœ RenamA01œ SngName œDelI01okœ CpyI1-35ø øB06-40okœP3 Edit Track CpyTr ØTr 1x99œSystem Deleting a mark P2 MIDI/SYNC settingsEdit System Input 1/2 assignARM 100 œ Song backupDiskUtil œ Drive informationØBHD1300œ Song restoreRestore œ ARM 100 ø A01SngN ø ØB02NoDA Initialize/formatPlay Mode Display ModeREC Mode P1 Counter display selectionP2 Post roll time setting Edit Play ModeP1 Pre roll time setting TriggerP1 Tempo map settings P1 Threshold level adjustmentP2 Pre trigger time setting Edit TriggerEdit Tempo P2 Metronome volume settingP1 Tempo source setting MetronomeEdit Metronome P1 Metronome volume settingP2 Metronome mode setting 15. IN/LOC1, OUT/LOC2, TO/LOC3P1 Scene parameter list SceneEdit Scene P2 Deleting a sceneUndo StoreScrub P1 Storing IN/LOC 1, OUT/LOC 2, TO/LOC 3 or a Scene22. EQ Track StatusEffect Send Fader P2 External output Aux level settingPAN/BALANCE OffREC Select P1-1 Pairing on/offPair On/Off Snd1-2000P1 Effect select RD1...SE9 Factory Preset, U01...U65 User AreaEffect P1-1Effect program category number selectP2-1 Monitor delay on/off P2 Monitor delay settingsP2-3Monitor delay parameter settings 200msœLoG-15dBœ Edit EffectP1 Editing and saving an effect All Effo RenøRoomEffect Assign Edit Effect AssignTroubleshooting AppendicesMidi sequencer does not synchronize to the D8 Various messages Midi Implementation Chart Block Diagram Effect Assign = Input 1/2 Effect Program List Type EFFECT1 EFFECT2 EFFECT3 EFFECT4Effect Parameter List 4BEQ 4 Band EqualizerNR Noise Reduction Phono Turntable SIM Scukyll Express Metronome Type ListDemo Song List Moonlit sea written by Yuko AsaiD8 Specifications Functions added to the D8 Bouncing tracks
Top Page Image Contents