Korg D8 Selecting the location at which the effect will be inserted, Selecting the effect program

Page 10

back with the [TRACK STATUS] left at REC, you will be able to audition the sound just as it was actually recorded.

If you set the [TRACK STATUS] to PLAY and play- back without changing the EQ settings the EQ will be applied double, so remember to set the EQ value back to 0.

4.Applying an effect to the input sound as you record

You can apply the internal effect of the D8 to the instrument connected to the INPUT 1/2 jack, and record the sound that has been processed by the effect.

■Connecting the input device and adjusting the level

1Refer to “■ Connecting the input device and adjusting the level” (p.11, p.12), to connect the input device and adjust the level.

It is not possible to use the effect when recording digitally.

■Selecting the location at which the effect will be inserted

2 Press the [EFFECT ASSIGN] key

INPUT 1/2

several times to select INPUT 1/2

MASTER

(indicator lit).

EFFECT

 

 

ASSIGN

 

E

With a setting of INPUT 1/2, the internal effect will be inserted between the input and the EQ of the mixer channel whose [TRACK STATUS] is set to REC.

 

 

 

 

 

FADER

 

 

 

 

 

 

 

OUTPUT

INPUT

 

Effect

 

[EQ]

 

 

RecTrack

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

HEQ LEQ

3Adjust the following effect settings while listening to the input sound of the instrument or other source.

Adjust the [TRIM] knob so that the effect (“E”) level meter does not light all the way to CLIP.

■Selecting the effect program

4Press the [EFFECT] key several times to access the display page for selecting an effect program, as shown below.

EG1:ROCK

EFFECT

E

5Rotate the [VALUE] dial to select an effect program.

■Editing the effect

6Each effect program consists of up to four effects.

(Refer to p.61) After pressing the [EDIT] key, press the [EFFECT] key several times to select the effect that you wish to edit.

DISTORT:oú

EDITEFFECT

E

7Rotate the [VALUE] dial to specify whether the effect you selected in step 6 will be used “o” (on) or not “-” (off).

8Press the [ ] key to select the effect parameter that you wish to edit. Pressing the [ ] key will move to the next parameter, and pressing the [ ] key will move to the previous parameter. (Refer to p.72)

TYPE:DISTú

9Rotate the [VALUE] dial to modify the value.

■Saving the effect program

If you wish to use the edited effect program in this song, or to use it in more than one song as a gen- eral-purpose effect, you must save the effect pro- gram in the user bank.

An edited effect which has not been saved will be lost if you perform one of the following actions.

•Select another effect program

•Select another song

•Turn off the power

10Press the [EFFECT] key several times to make the display read “Ren→ ✽✽✽” (✽ is the effect program name).

RenùROCK

11Press the [ ] key several times to move the cursor to the location where you wish to modify the name, and rotate the [VALUE] dial to enter alpha- betical characters or symbols to assign the desired name.

Ï is a special symbol. Once this display is modi- fied, it cannot be selected newly.

12 Press the [EFFECT] key to access the “Write→ U✽✽” display. (U indicates the user bank area, and ✽✽ is the effect number.)

WriteùU01?

EDIT

EFFECT

 

E

13Rotate the [VALUE] dial to select the save destina- tion in which the effect program will be saved.

14Hold down the [ ] key for approximately one sec- ond to save the effect program and its name. When the data has been saved, the display will indicate “Completed”.

Chapter 2

Operation

 

 

Recording

13

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Page Table of Contents Synchronization and control with a Midi Adjusting and storing mixer settingsMoving and storing time locations Saving to and loading from DATOperation Connections, Power-on, Demo Power on/offConnections to your audio system etc Listening to the demo songs Turning the power onTurning the power off 01ScukyllNaming a song Creating a new songCreating and selecting songs 03KORG1 Connecting the input device and adjusting the levelRecording analog record- ing Starting and stopping recordingRecording digital recording Using EQ to modify the tone as you recordAdjusting the EQ BackEditing the effect Selecting the location at which the effect will be insertedSelecting the effect program Saving the effect programSending the input sound to the effect Master Send TypeTurning the monitor delay on/off Applying the dedicated delay to the input soundEditing the monitor delay Select the input monitor Select the playback/recording tracksMonAuto Redo Auto Punch In/OutUndo Storing the in and OUT timesPstRol02M Auto punch in/out settingRehearsing auto punch in/out Playback track and recording track settings Combining multiple tracks into one or two tracks BounceAdjusting the playback level and recording level Applying EQ and effects while you recordListening to the metro- nome while you record Trigger recording PlaybackSelecting the tracks for playback Applying an effect to the playback soundSending the playback sound to the external effect Moving and storing time locations Switching scenes dur- ing playbackProgram playback of songs Moving the current timeFinding a precise time location Locate points LOC1, LOC2, LOC3MarkùM001 Mark pointsStoring a Mark point Moving to a Mark pointPairing on/off Pairing settingsAdjusting the volume of each channel Enabling parameters for pairingAdjusting the Effect Send, AUX Send and Track Status Adjusting the stereo locationUsing the EQ to adjust the tone Adjusting the High EQStoring a scene Switching scenes during a songScene Recalling a sceneRecording a master tape Mixdown Applying an effect dur- ing mixdownEditTrackú Storing IN, OUT and to timesCopying track data Track Copy CpyTr 1 ¿CpyTrCLPÏ¿ ¿TrCLP Ï¿Tr 1x 1Ï Inserting a blank space into the IN-OUT area of a track Inserting a blank space into the track data Insert TrackErasing data from a track Erase Track Ins¿Tr 1?Del¿Tr 1? Deleting data from a track Delete TrackDeleting data from the IN-OUT area of a track Swapping the IN-OUT areas of two tracksMoving a song Song RecoverCopying a song Deleting a songCreating a tempo map Tempo map settingsRecording Midi Clock data from a sequencer Deleting a tempo mapRecording tap tempo Selecting the tempo sourceTo the D8 Using MTC to synchroUsing Midi Clock to synchronize a Midi sequencer to the D8 Nize a Midi sequencerRcvMMCo Ï Using MMC to control the D8 from a Midi sequencerConnecting an external drive DevID 01ÏInitializing and format- ting a drive Exchanging disks on a removable disk driveSaving a song on a removable disk drive Backup ARM 100 ¿ Restore ÏInsNextDsk A01SngNa¿¿HDAT100Ï Saving a song to a DAT recorder BackupBackup Ï ¿DATokÏHDAT100 ¿ Loading a backed-up song from a DAT recorder RestoreLoading a backed-up song from a DAT recorder Restore PlayDAT ÏReference P1 Song number/name display SONG/TRACKEdit SONG/TRACK Drive/song selectMovøI01okœ RenamA01œ SngName œDelI01okœ CpyI1-35ø øB06-40okœP3 Edit Track CpyTr ØTr 1x99œSystem Deleting a mark P2 MIDI/SYNC settingsEdit System Input 1/2 assignARM 100 œ Song backupDiskUtil œ Drive informationØBHD1300œ Song restoreRestore œ ARM 100 ø A01SngN ø ØB02NoDA Initialize/formatPlay Mode Display ModeREC Mode P1 Counter display selectionP2 Post roll time setting Edit Play ModeP1 Pre roll time setting TriggerP1 Tempo map settings P1 Threshold level adjustmentP2 Pre trigger time setting Edit TriggerEdit Tempo P2 Metronome volume settingP1 Tempo source setting MetronomeEdit Metronome P1 Metronome volume settingP2 Metronome mode setting 15. IN/LOC1, OUT/LOC2, TO/LOC3P1 Scene parameter list SceneEdit Scene P2 Deleting a sceneUndo StoreScrub P1 Storing IN/LOC 1, OUT/LOC 2, TO/LOC 3 or a Scene22. EQ Track StatusEffect Send Fader P2 External output Aux level settingPAN/BALANCE OffREC Select P1-1 Pairing on/offPair On/Off Snd1-2000P1 Effect select RD1...SE9 Factory Preset, U01...U65 User AreaEffect P1-1Effect program category number selectP2-1 Monitor delay on/off P2 Monitor delay settingsP2-3Monitor delay parameter settings 200msœLoG-15dBœ Edit EffectP1 Editing and saving an effect All Effo RenøRoomEffect Assign Edit Effect AssignTroubleshooting AppendicesMidi sequencer does not synchronize to the D8 Various messages Midi Implementation Chart Block Diagram Effect Assign = Input 1/2 Effect Program List Type EFFECT1 EFFECT2 EFFECT3 EFFECT4Effect Parameter List 4BEQ 4 Band EqualizerNR Noise Reduction Phono Turntable SIM Scukyll Express Metronome Type ListDemo Song List Moonlit sea written by Yuko AsaiD8 Specifications Functions added to the D8 Bouncing tracks
Top Page Image Contents