Korg D8 manual Edit Effect Assign

INPUT 1/2

MASTER

EFFECT

ASSIGN

30. EFFECT ASSIGN

Effect insert location select[................................. INPUT 1/2,

MASTER (Send Type), MASTER (Global Type), OFF]

Selects the location at which the internal effect will be inserted.

INPUT 1/2: The internal effect will be inserted between the EQ and the fader of mixer channels whose [TRACK STATUS] is set to REC (ANALOG). (Refer to p.70)

E

Use this setting when you wish to apply an insertion-type effect during recording.

The “Snd” (refer to “23. EFFECT SEND”) for each channel will automatically be turned off.

MASTER (Send Type): The signals	lit
(send bus) which are sent from the	INPUT 1/2
“Snd” (refer to EFFECT SEND) of
	MASTER
each mixer channel will be sent to
the internal effect, and the effect	EFFECT
will be inserted as a master effect	ASSIGN
		E
which outputs to the master bus.
(Refer to p.69) Since the signal sent

to the effect is monaural, there may be cases in which the desired result will not occur even if a stereo-input type effect is selected.

Use this setting when you wish to apply a master-type effect during playback or recording, or to apply an insertion-type effect to the playback while recording it. The “Snd” (refer to “23. EFFECT SEND”) of each chan- nel is set manually.

MASTER (Global type): The out-	blinking
put of the master bus will be sent to	INPUT 1/2
the internal effect, and the effect
	MASTER
will be inserted as a master effect
before the master fader. (Refer to	EFFECT
p.70)	ASSIGN
		E
Use this setting when you wish to

apply an effect such as a stereo compressor etc. to the entire song during mixdown.

The “Snd” (refer to “23. EFFECT SEND”) of each chan- nel is turned off automatically.

OFF: The audio return from the inter-	INPUT 1/2
nal effect will be turned off.	MASTER
The effect return level setting (refer to	EFFECT
“EDIT EFFECT ASSIGN P1”) will be
	ASSIGN
ignored.	E

31. EDIT EFFECT ASSIGN

P1 Effect return level setting

1

EffRet:000

P1-1 Effect return level setting [000...100]

Sets the volume of the signal that is returned from the internal effect.

P2 Effect return balance setting

1

EffBal:CNT

P2-1Effect return balance setting [L50...CNT...R50]

Sets the left/right balance of the signal that is returned from the internal effect.

P3 External input (AUX IN) level setting

1

AuxRet:000

P3-1External input (AUX IN) level setting [000...100]

Sets the input volume level of the external input (AUX IN).

P4 External input (AUX IN) balance setting

1

AuxBal:CNT

P4-1External input (AUX IN) balance setting ...........

[L50...CNT...R50]

Sets the left/right balance of the signal from the exter- nal input (AUX IN).

64