Korg manual Using MTC to synchro, To the D8, Nize a Midi sequencer

Page 35

Synchronization

STEP11 and control with a

MIDI sequencer

This section explains how a MIDI sequencer can be syn- chronized to the D8, and how recording and playback on the D8 can be controlled from a MIDI sequencer.

“Synchronization” refers to a condition in which a D8 and a MIDI sequencer or rhythm machine etc. can be operated at the same timing. The device that is output- ting the synchronization clock is called the “master”, and the device that is receiving the synchronization clock and synchronizing to it is called the “slave”. The D8 can be used as the master. It is also possible to con- trol recording or playback on the D8 by transmitting MMC messages from a MIDI sequencer etc.

MIDI Keyborad

3Press the [ ] key, and then press the [SYSTEM] key several times to make the display read “Gen”.

Gen:ClockÏ

4Rotate the [VALUE] dial to select Clock.

5Adjust the settings on the MIDI sequencer so that MIDI Clock messages from an external device will be received. (For details refer to the owner’s man- ual for your MIDI sequencer.)

6Start the MIDI sequencer (it will be in playback- ready mode).

7Press the [PLAY] key of the D8 to begin playback, and the MIDI sequencer will start playback at the tempo specified by the D8.

2. Using MTC to synchro-

MIDI interface

MIDI IN

MIDI OUT

(slave)

(slave)

MIDI clock

MTC

(maste)

(master)

MIDI OUT

MIDI IN

1

2

3

4

5

6

7 / 8 MASTER

D8

INPUT

1 2

 

MIDI IN

 

 

MIDI OUT

 

OUTPUT L

R

MIDI device

 

 

 

 

 

MIDI IN

MIDI OUT

 

 

 

OUTPUT

 

 

 

L

R

 

MMC

 

INPUT

 

INPUT

 

 

L

R

L

R

AUX

MASTER

 

 

 

IN

OUT

 

 

 

DIGITAL

 

 

 

 

OUT

 

 

 

 

 

 

Mixer

 

 

DIGITAL

IN

Master recorder (DAT, MD etc.)

nize a MIDI sequencer

to the D8

Here’s how the D8 can be used as the master, so that the slave MIDI sequencer will synchronize to the MTC (MIDI Time Code) messages transmitted from the D8.

You will need to use a MIDI sequencer that sup- ports MTC. If your MIDI sequencer does not sup- port MTC, you must use MIDI Clock for synchronization.

1 Use a MIDI cable to connect the D8’s MIDI OUT

connector to the MIDI IN connector of the MIDI

Mic

Guitar

1.Using MIDI Clock to synchronize a MIDI sequencer to the D8

Here’s how the D8 can be used as the master, so that a slave MIDI sequencer will synchronize to the MIDI Clock messages transmitted from the D8.

1Use a MIDI cable to connect the D8’s MIDI OUT connector to the MIDI IN connector of the MIDI sequencer.

2Press the [EDIT] key, and then press the [SYSTEM] key several times to make the display read “MIDI/ Sync”.

MIDI/SyncÏ

EDITSYSTEM

E

sequencer.

2 Press the [EDIT] key, and then press the [SYSTEM]

key several times to make the display read “MIDI/

Sync”.

MIDI/SyncÏ

EDITSYSTEM

E

3Press the [ ] key, and then press the [SYSTEM] key several times to make the display read “Gen”.

Gen:MTC30Ï

4Rotate the [VALUE] dial to select MTC30.

5Adjust the settings on the MIDI sequencer so that MTC messages from an external device will be received. (For details refer to the owner’s manual for your MIDI sequencer.)

6Start the MIDI sequencer (it will be in playback- ready mode).

7Press the [PLAY] key of the D8 to begin playback, and the MIDI sequencer will start.

38

Page 34 Page 36
Image 35
Page 34 Page 36
Contents Page Table of Contents Saving to and loading from DAT Adjusting and storing mixer settingsMoving and storing time locations Synchronization and control with a MidiOperation Connections to your audio system etc Power on/offConnections, Power-on, Demo 01Scukyll Turning the power onTurning the power off Listening to the demo songsCreating and selecting songs Creating a new songNaming a song Starting and stopping recording Connecting the input device and adjusting the levelRecording analog record- ing 03KORG1Back Using EQ to modify the tone as you recordAdjusting the EQ Recording digital recordingSaving the effect program Selecting the location at which the effect will be insertedSelecting the effect program Editing the effectMaster Send Type Sending the input sound to the effectEditing the monitor delay Applying the dedicated delay to the input soundTurning the monitor delay on/off MonAuto Select the playback/recording tracksSelect the input monitor Storing the in and OUT times Auto Punch In/OutUndo RedoRehearsing auto punch in/out Auto punch in/out settingPstRol02M Combining multiple tracks into one or two tracks Bounce Playback track and recording track settingsApplying EQ and effects while you record Adjusting the playback level and recording levelListening to the metro- nome while you record Playback Trigger recordingSending the playback sound to the external effect Applying an effect to the playback soundSelecting the tracks for playback Moving the current time Switching scenes dur- ing playbackProgram playback of songs Moving and storing time locationsLocate points LOC1, LOC2, LOC3 Finding a precise time locationMoving to a Mark point Mark pointsStoring a Mark point MarkùM001Enabling parameters for pairing Pairing settingsAdjusting the volume of each channel Pairing on/offAdjusting the High EQ Adjusting the stereo locationUsing the EQ to adjust the tone Adjusting the Effect Send, AUX Send and Track StatusRecalling a scene Switching scenes during a songScene Storing a sceneApplying an effect dur- ing mixdown Recording a master tape MixdownCpyTr 1 ¿ Storing IN, OUT and to timesCopying track data Track Copy EditTrackú¿Tr 1x 1Ï ¿TrCLP ÏCpyTrCLPÏ¿ Ins¿Tr 1? Inserting a blank space into the track data Insert TrackErasing data from a track Erase Track Inserting a blank space into the IN-OUT area of a trackSwapping the IN-OUT areas of two tracks Deleting data from a track Delete TrackDeleting data from the IN-OUT area of a track Del¿Tr 1?Deleting a song Song RecoverCopying a song Moving a songDeleting a tempo map Tempo map settingsRecording Midi Clock data from a sequencer Creating a tempo mapSelecting the tempo source Recording tap tempoNize a Midi sequencer Using MTC to synchroUsing Midi Clock to synchronize a Midi sequencer to the D8 To the D8DevID 01Ï Using MMC to control the D8 from a Midi sequencerConnecting an external drive RcvMMCo ÏExchanging disks on a removable disk drive Initializing and format- ting a driveSaving a song on a removable disk drive Backup A01SngNa¿ Restore ÏInsNextDsk ARM 100 ¿¿DATokÏ Saving a song to a DAT recorder BackupBackup Ï ¿HDAT100ÏPlayDAT Ï Loading a backed-up song from a DAT recorder RestoreLoading a backed-up song from a DAT recorder Restore HDAT100 ¿Reference Drive/song select SONG/TRACKEdit SONG/TRACK P1 Song number/name displayCpyI1-35ø øB06-40okœ RenamA01œ SngName œDelI01okœ MovøI01okœCpyTr ØTr 1x99œ P3 Edit TrackSystem Input 1/2 assign P2 MIDI/SYNC settingsEdit System Deleting a markDrive information Song backupDiskUtil œ ARM 100 œInitialize/format Song restoreRestore œ ARM 100 ø A01SngN ø ØB02NoDA ØBHD1300œP1 Counter display selection Display ModeREC Mode Play ModeTrigger Edit Play ModeP1 Pre roll time setting P2 Post roll time settingEdit Trigger P1 Threshold level adjustmentP2 Pre trigger time setting P1 Tempo map settingsMetronome P2 Metronome volume settingP1 Tempo source setting Edit Tempo15. IN/LOC1, OUT/LOC2, TO/LOC3 P1 Metronome volume settingP2 Metronome mode setting Edit MetronomeP2 Deleting a scene SceneEdit Scene P1 Scene parameter listP1 Storing IN/LOC 1, OUT/LOC 2, TO/LOC 3 or a Scene StoreScrub UndoEffect Send Track Status22. EQ Off P2 External output Aux level settingPAN/BALANCE FaderSnd1-2000 P1-1 Pairing on/offPair On/Off REC SelectP1-1Effect program category number select RD1...SE9 Factory Preset, U01...U65 User AreaEffect P1 Effect select200msœ P2 Monitor delay settingsP2-3Monitor delay parameter settings P2-1 Monitor delay on/offAll Effo RenøRoom Edit EffectP1 Editing and saving an effect LoG-15dBœEdit Effect Assign Effect AssignAppendices TroubleshootingMidi sequencer does not synchronize to the D8 Various messages Midi Implementation Chart Block Diagram Effect Assign = Input 1/2 Type EFFECT1 EFFECT2 EFFECT3 EFFECT4 Effect Program List4BEQ 4 Band Equalizer Effect Parameter ListNR Noise Reduction Phono Turntable SIM Moonlit sea written by Yuko Asai Metronome Type ListDemo Song List Scukyll ExpressD8 Specifications Bouncing tracks Functions added to the D8
Top Page Image Contents