Replacing Belt
Motor Shaft
Arbre du moteur Eje del transmissión del motor
Agitator Assembly
Assemblage de l’agitateur
Montaje del agitador
Tabs
Lenguettes
Pestaña
Agitator Cover
Couvercle de l’agitateur
Cubierta del agitador
Cover Base
Couvercle Base
Cubierta Base
➢Install new belt in belt groove on the agitator assembly, then over the motor shaft.
➢Place agitator assembly back into
POWER NOZZLE.
➢Replace agitator cover.
➢Line up front of cover and base.
➢Rest cover on front edge of base as shown.
➢Tilt cover to back.
➢Press cover firmly until tabs snap into place.
➢Replace cover screws
- 42 -