Primary Filter Cleaning
Latches
Loquets
Lengüetas
Filter
Filtre
Filtro
Filter Cover
Couvercle du filtre Cubierta de filtro
It is recommended to clean filter with cold water at least every three (3) months.
Check the primary filter frequently and clean when dirty.
➢Remove the cover by pressing the latches located on each side.
➢Lift cover off of vacuum cleaner.
➢Remove the primary filter from the filter cover.
➢Wash with cold water only, DO NOT use detergent or soap.
➢Once the filter is washed clean, squeeze by hand and allow to air dry.
➢Allow filter to dry 24 hours before putting back into vacuum cleaner.
NOTE: When the cleaning of the filter no longer restores vacuum cleaner suction to full power, replace the filter.
DO NOT operate without primary filter installed.
DO NOT wash in the dishwasher.
DO NOT install damp.
➢Reinstall the filter into the filter cover.
➢Reinstall the filter cover by snapping into place on the the vacuum cleaner. A noticeable “click” should be heard.
- 46 -