| Administering the Switch for CMS High Availability Systems | CentreVu CMS R3V8 High Availability |
| |
|
| Connectivity, Upgrade and Administration |
| |
| Administering the Definity Switch |
| ||
|
|
|
|
|
|
|
|
|
|
Setting Up the Link on the CMS Computer
The following information must be obtained to set up the CMS link:
•switch name
•switch model (release)
•is Vectoring enabled on the switch (if authorized)?
•is Expert Agent Selection (EAS) enabled on the switch (if authorized)?
•does the Central Office have disconnect supervision?
•local and remote port
The local and remote port assignments must be symmetrical between the switch and the CMS. For example, if the CMS local port is 1 and the remote port is 10, the switch local port must be 10 and the remote port must be 1.
•the hostname or IP address, and TCP port
Note:
In addition to the switch administration presented in this chapter, you must also set up the switch link on the CMS computer using the setup or swsetup options of the cmssvc command. This procedure is documented in CentreVu® CMS Software Installation and Setup
941).
Administering the Definity Switch
Overview
Administering
the LAN
Connection
This section contains the procedures required to establish a communications link between the CMS computer and the switch.
Use the procedures in this section to administer the LAN connection to the switch. This section contains examples of the switch administration