Lucent Technologies Release 3 Version 8 manual Adding an Ethernet Data Module

Administering the Switch for CMS High Availability Systems	CentreVu CMS R3V8 High Availability
Connectivity, Upgrade and Administration
Administering the Definity Switch	4-14

Adding an Ethernet Data Module

Use the Data Module form to assign an ethernet data module (this is a different version of the form than that used for DEFINITY R7). With the High Availability option, you assign two ethernet data modules.

add data-module 2000	Page	1 of	1
	DATA MODULE
Data Extension: 2000	Name: ethernet data module	BCC: 2
Type: ethernet
Port: 01A0317
Link: 8

Network uses 1’s for Broadcast Address? y

Field	Definition
Data Extension	Enter an unassigned extension number.
Type	Enter ethernet.
Port	Enter the equipment location of the C-LAN
	circuit pack (TN799). For the ethernet link,
	always use circuit 17 (for example,
	01A0317).
Link	Enter a TCP/IP link number (1-25 for csi/si,
	1-33 for r). This entry is also used on the
	Processor Channel form.
Name	Enter a name for the data module. This name
	will display when you list the assigned data
	modules.
BCC	A display-only field.
Network uses 1’s for	This sets the host portion of the IP address to
Broadcast Address	0’s or 1’s. The default is yes (all 1’s). Use the
	default if the private network contains only
	DEFINITY switches and adjuncts. Enter n
	only if the network includes non-DEFINITY
	switches that use the 0’s method of forming
	broadcast addresses.