Lucent Technologies Release 3 Version 8 manual Cms3

Upgrading CMS to the High Availability Option	CentreVu CMS R3V8 High Availability
	Connectivity, Upgrade and Administration
Setting Up CMS on an HA Server	3-39
.

# Enter a name for this UNIX system (up to 256 characters):

cms3

#Select the type of backup device you are using

#1) SCSI QIC-150 cartridge tape - 150MB tape

#2) 40.0 Gbyte 8mm tape

#3) 14.0 Gbyte 8mm tape

#4) 5.0 Gbyte 8mm tape

#5) SCSI QIC-2.5 cartridge tape - 2.5GB tape

#6) SCSI 4-8 SLR cartridge tape - 4GB tape 8GB compressed)

#Enter choice (1-6):

5
# Default backup		device paths based on device type:
# Device		Default	backup path
# SCSI QIC-150 cartridge tape - 150MB tape			/dev/rmt/0
# 40.0	Gbyte 8mm	tape	/dev/rmt/0c
# 14.0	Gbyte 8mm	tape	/dev/rmt/0c
# 5.0 Gbyte 8mm tape			/dev/rmt/0

#SCSI QIC-2.5 cartridge tape - 2.5GB tape /dev/rmt/0c

#SCSI 4-8 SLR cartridge tape - 4GB tape (8GB compressed) /dev/rmt/0c

#Enter the default backup device path:

/dev/rmt/0c

# Enter number of ACDs being administered (1-8):

3

#The following information is required per ACD:

#Information for ACD 1:

#Enter switch name (up to 20 characters):

#Select the model of switch for this ACD

#1) Definity-G3V2

#2) Definity-G3V3

#3) Definity-G3V4

#4) Definity-G3V5

#5) Definity-R6/R7

#6) Definity-R8

#Enter choice (1-6):

6

# Is Vectoring enabled on the switch? (y/n):

y

# Is Expert Agent Selection enabled on the switch? (y/n):

y

# Does the Central Office have disconnect supervision? (y/n):

y

#If the Central Office has disconnect supervision, enter 0.

#Otherwise, ACD calls shorter than the Phantom Abandon

#Call Timer value will be counted as abandoned.

#Enter the Phantom Abandon Call Timer value in seconds (0-10):

0

# Enter the local port assigned to switch (1-64):

1

# Enter the remote port assigned to switch (1-64):

1