Lucent Technologies Release 3 Version 8 manual These error messages can be ignored

Page 93

Upgrading CMS to the High Availability Option		CentreVu CMS R3V8 High Availability
		Connectivity, Upgrade and Administration
Performing a New Full Maintenance Backup and Restore		3-73

3.From the main menu, select Maintenance > Restore Data

The Maintenance: Restore Data window is displayed. In the Data to Restore fields, select the Historical data and Non- CMS data options, as illustrated in the following figure:

4.After you verify that the correct restore options are selected, press enter to move the active cursor to the action box in the top right corner of the window, select the Run option and press enter.

Note:

If the customer does not have any Custom Report Tables set up by the PSO, the Maintenance: Restore Data window will display the following message when the restore is run:

Errors: Initialization errors. See Error Log.

To view the Error Log, select Maintenance > Error Log from the

CMS menu. The relevant log message should read as follows:

Restore process startup failed. Cannot restore non-CMS

data because there are not tables in the database for

that group.

These error messages can be ignored.

Image 93

Contents CentreVu Call Management System Comments Table of Contents Page Page Page Overview IntroductionSupported CMS Platform Combinations Supported Definity SwitchesRequired and Optional Software General Roles and Responsibilities Special Upgrade ConsiderationsChapter Task Technician Software CustomerCustomer-Specific Roles and Responsibilities Technician Support for U.S. and Canada CentreVu CMS HelplinesNo switch-over Server Switch-Over OptionsBasic Configuration Rules Customized software switch-overManual server switch-overs Connecting Blocks Planning for LAN Switch Links Overview Overview Connecting to the Definity SwitchConnectivity Options Ethernet Ports on a CMS ComputerConnecting with a 10Base-T Hub RJ45 UTP Category 5 modular cord Quantity Description ComcodeCabling Diagram LAN via 10Base-T Hub Upgrading CMS to the High Availability Option HA Upgrade ScenariosHA Upgrade Scenarios Overview HA Upgrade Procedure HA Upgrade Scenarios HA Upgrade Scenarios Verifying the Tape Drive on an Enterprise 3000 Server Tape Verification ProcedurePrerequisites Performing a Cmsadm BackupBackup Filesystem Pkginstall Xxxxxxx blocks Performing a Cmsadm Backup Performing a Full Maintenance Backup Performing a Maintenance Backup Administration Data Only System responds Overview Prerequisites Setting Up CMS on an HA ServerOverview Setting AuthorizationsProgram responds ProcedurePurchased version is R3V8. Is this correct? y/n Authorize use of external application feature? y/n Default n Purchased Non-EAS Switch Agent Number of Split or Skill MembersCapabilities/capacities authorized date/time Overview Procedure Setting Up Data Storage ParametersSetting Up CMS on an HA Server Setting Up CMS on an HA Server Prerequisites Setting Up a LAN for Switch ConnectionsEditing ProceduresFile Setting Up the CMS Application Setup MethodsOverview Prerequisites Overview ProcedureIf system setup has already been done, the program responds Enter 4 to select Setup optionPress enter to accept the default. The program responds Is Vectoring enabled on the switch? y/n Enter the local port assigned to switch Enter 2 to select TCP/IP Program responds Enter the number of shifts. The program responds Number of trunk groups Enter the number of vectors. The program responds Tail /cms/install/logdir/admin.log Editing the File Setting Up CMS Using a Unix Flat FileCms3 192.168.2.2 0800AM # Definity-G3V5/Definity-R6/R7/Definity-R8 Flat File Enter 2 to select the flat file option. The program responds Tail -f /cms/install/logdir/admin.log Installing Feature Packages Installing Forecasting PackageOverview Prerequisites Procedure Authorizations on Select the pkginstall option. The program responds Forecasting package installed date/time Installing External Call History Package R3V Backup Filesystem backup Pkginstall Printers, and Modems 585-215-874. The program responds Number of call segments to buffer for ACD xxxxx Package on Hardware Platform Port a Port B Setting Up the Remote ConsoleRedirecting the Remote Console Port to the Modem Redirect the console back to the local console by entering Setting Up the Alarm Originator Setting Up the NTSConfiguring Eeprom configuration information Flash self-boot image Enter 1 to erase EEPROM. The program responds Enter N. The program returns to the monitor prompt For the 64- port NTS, the boot file name is Migrating CMS System Administration Data to the New Server Creating an Alternate Boot Device for Mirrored SystemsMigrating CMS System Administration Data to the New Server Checking the Archive Interval Performing an Incremental Maintenance Backup Administering the SwitchUpgrade the Original CMS Server Migrating CMS Historical Data to the New HA Server Migrate Administration Data Migrating Administration Data Back Onto the Original ServerMigrating Administration Data Back Onto the Original Server Performing a New Full Maintenance Backup and Restore These error messages can be ignored Performing Cmsadm Backups on the HA Servers Multiple ACDs Switches on HA Systems Setting Up Version and Release ValuesDefinity Switch Administration Overview Determining Switch/CMS CompatibilityAdministration Adjunct CMSField Definition Setting the Switch VersionCall Center Optional Features Setting the Call Center ReleaseCall Center System Parameters Agent and Call Selection Setting Adjunct CMS ReleaseAdministering the Definity Switch Setting Up the Link on the CMS ComputerOverview Administering LAN Connection Form Purpose Adding a Second Packet Interface Administering the Definity Switch Node Names Adding Node Names and IP AddressesProcedure. See CentreVu CMS Software Adding a C-LAN IP Interface LAN Adding an Ethernet Data Module Processor Channel Assignment Adding Processor Interface ChannelsFrom a gateway for example, a router to a network Adding IP RoutingAdministering the Switch for CMS High Availability Systems Administering the Switch for CMS High Availability Systems Index IndexIN-2