Lucent Technologies Release 3 Version 8 manual Lan

Administering the Switch for CMS High Availability Systems		CentreVu CMS R3V8 High Availability
	Connectivity, Upgrade and Administration
Administering the Definity Switch		4-13

Field	Definition
Network regions are	Enter n. This application is not used for
interconnected	C-LAN.
Enabled	Enter y to enable the C-LAN IP interface.
	After initial administration, you must disable
	the interface before you make any changes.
Type	Enter C-LAN.
Slot	Enter the equipment location of the C-LAN
	circuit pack.
Code/Sfx	This is a display-only field that shows the
	designation number of the circuit pack
	installed in the specified slot.
Node Name	Enter the switch node name assigned on
	Pages 2 through 6 of the Node Names form.
	In this example, enter switchhost. The
	same node name cannot be assigned to two
	different IP interfaces.
Subnet Mask	Identifies which portion of an IP address is a
	network address and which is a host
	identifier. Use the default entry, or check with
	the LAN administrator on site if connecting
	through the customer’s LAN.
Gateway Address	If the application goes to points off the
	subnet, a Gateway Address of the router is
	required; if the switch and the CMS server
	are on the same subnet, a Gateway address
	if not required.
	If required, enter the address of a network
	node that will serve as the default gateway
	for the IP interface. If using ethernet only,
	and a Gateway Address is administered, no
	IP routes are required.
Net Rgn	For a C-LAN IP interface, use 1.