Philips SC2003 user manual Problem Possible cause

28ENGLISH

Problem Possible cause Solution

	The UV filter
	of the light exit
	window is broken.
	The appliance is
	defective.
I experience an	You did not shave
unacceptable pain	the areas to
sensation when I use the	be treated
appliance.
	You treated an
	area for which the
	appliance is not
	intended.
	You have used
	a light intensity
	which is too high
	for you.
	The light exit
	window or reddish
	filter glass of the
	attachment is
	broken.
	The appliance is
	not suitable for
	your skin colour.
The treated areas	Slight redness
become red after the	is harmless and
treatment.	normal and
	disappears quickly.
The skin reaction after	You have used
the treatment lasts	a light intensity
longer than usual.	which is too high
	for you.
The hair-removal results	You have used
are not satisfactory.	a light intensity
	which is too low
	for you.
	You did not make
	enough overlaps
	when you used
	the appliance.

If the UV filter of the light exit window is broken, do not use the appliance anymore. Contact the Consumer Care Centre in your country, your Philips dealer or a Philips service centre.

Contact the Consumer Care Centre in your country, your Philips dealer or a Philips service centre.

Shave the areas to be treated before you use the appliance. If shaving causes skin irritation, trim hairs as short as possible and use a comfortable setting.

You must not use the appliance on your inner labia, vagina, anus, nipples, areolas, lips, inside the nostrils and ears, in the region of your eyes and eyebrows. Men must not use it on their face or scrotum.

Reduce the light intensity to a level that is comfortable for you. See chapter ‘Preparing for use’, section ‘Setting the light intensity’.

If the light exit window or reddish filter glass of the precision attachment is broken, do not use the appliance with this attachment any more. Go to your dealer or a Philips service centre or contact the Consumer Care Centre to have the attachment replaced.

Do not use the appliance if you have a very dark skin. Do not use it either if your body hair is light blond, red, grey or white.

No action required.

Select a lower light intensity the next time. See chapter ‘Preparing for use’, section ‘Setting the light intensity.

If the skin reaction lasts longer than 3 days, contact your doctor.

Select a higher light intensity the next time.

For proper hair-removal results, you have to make overlaps when you use the appliance. See chapter ‘Using the appliance’, step 11.