|
|
| ENGLISH 27 |
|
| Possible cause | Solution |
| Problem | ||
|
|
|
|
|
| The safety ring is | Clean the safety ring carefully. If you are unable to clean |
|
| dirty. | the safety ring properly, contact the Consumer Care |
|
|
| Centre in your country, your Philips dealer or a Philips |
|
|
| service centre to replace the attachment. |
| The ‘ready to flash’ light | The overheat | When the overheat protection has been activated, the |
| does not go on when I | protection has | fan still works. Do not switch off the appliance and let it |
| place an attachment on | been activated. | cool down for approx. 15 minutes before you continue |
| my skin, but the cooling |
| to use it. If the ‘ready to flash’ light still does not go on |
| fan works. |
| when you place the appliance on the skin, contact the |
|
|
| Consumer Care Centre in your country, your Philips |
|
|
| dealer or a Philips service centre. |
| The ‘ready to flash’ light is | The appliance | To reset the appliance, switch off the appliance and |
| green but the appliance | needs to be reset. | switch it on again. If the ‘ready to flash’ light is green |
| does not produce a flash |
| but the appliance still does not produce a flash when |
| when I press the flash |
| you press the flash button, contact the Consumer Care |
| button. |
| Centre in your country, your Philips dealer or a Philips |
|
|
| service centre. |
| The appliance becomes | This is normal. | No action required. |
| warm during use. |
|
|
| The appliance does not | The appliance | To reset the appliance, switch it off and on again. If the |
| show light intensity 1 | needs to be reset. | appliance still does not show light intensity 1, contact |
| when I switch it on. |
| your Customer Care Centre, your Philips dealer or a |
|
|
| Philips Service Centre. |
| The appliance produces | The attachment | Clean the attachment carefully. If you are unable to |
| a strange smell. | and/or the filter | clean the attachment properly, contact the Consumer |
|
| glass is dirty. | Care Centre in your country, your Philips dealer or a |
|
|
| Philips service centre to replace the attachment. |
|
| You have not | If there are hairs on the area to be treated, these |
|
| shaved the area | hairs may get burnt when you use the appliance. As |
|
| to be treated | a result, you notice a strange smell. Shave the area to |
|
| properly. | be treated properly before you use the appliance. If |
|
|
| shaving causes skin irritation, trim hairs as short as |
|
|
| possible and use a comfortable setting. |
|
| You stored the | The strange smell disappears after a few flashes. |
|
| appliance in a |
|
|
| dusty environment. |
|
| The skin feels more | The light intensity | Check if you have selected the right light intensity. If |
| sensitive than usual | you use is too high. | necessary, select a lower light intensity. |
| during treatment. |
|
|
|
| You did not shave | Shave the areas to be treated before you use the |
|
| the areas to be | appliance. If shaving causes skin irritation, trim hairs as |
|
| treated. | short as possible and use a comfortable setting. |
|
|
|
|