Philips SC2003 user manual Subsequent use

ENGLISH 17

6After the skin test, wait for 24 hours and check your skin for

any reaction. If your skin shows reactions, choose the highest setting that did not result in any skin reaction for subsequent use.

When you use the appliance for the first time, we advise you to perform

a skin test on the area to be treated to check your skin’s reaction to the

treatment and to get accustomed to light-based treatment.

Subsequent use

1

2

3

Before every treatment, clean the attachments, the light exit window and the metallic frame inside the attachments of Philips Lumea Precision Plus. For more information see chapter ‘Cleaning and maintenance’.

Choose the attachment appropriate for the area you intend to treat. Press the on/off button to switch on the appliance.

Note: It is normal that the appliance and the attachment become warm during use.

4Start each treatment by selecting the light intensity very carefully, based on your skin’s sensitivity and on how comfortable treatment feels.

Your skin may react differently on different days/occasions for a number of

reasons. See section ‘Possible side effects and skin reactions’ in this chapter

for more information.

5Press the % button to increase the intensity.To lower the intensity,

press the ^button.

,, Every time you press the button, the corresponding intensity light starts to flash.This takes a few seconds.

6Place the appliance at a 90° angle on the skin so that the attachment and the safety ring are in contact with the skin.