Cisco Systems 7931G manual Click Remote Destinations

If you want to...	Then do this after you log in...
Add a new remote	1.	Choose User Options > Mobility Settings > Remote Destinations.
destination	2. Select the device from the Name drop-down list box.
	3. Click Remote Destinations.
	4. Click Add New.
	5. Enter the following information:
		– Name—Enter a name for the mobile (or other) phone.
		– Destination Number—Enter your mobile phone number.
		– Answer Too Soon Timer—Enter the amount of time before you can
		pick up a call on the remote destination (in milliseconds).
		– Answer Too Late Timer—Enter the amount of time after which it is
		too late to pick up a call on the remote destination (in milliseconds).
		– Delay Before Ringing Timer—Enter the amount of time before the
		call rings on the remote destination (in milliseconds).
		– Remote Destination Profile—Select a remote destination profile,
		which contains the settings that apply to all of your remote
		destinations.
		– Allowed Access List—Select a phone number or rule that allows your
		mobile phone to ring when a call comes in to your desktop phone.
		You can select an allowed access list or blocked access list, but not
		both.
		– Blocked Access List—Select a phone number or rule for which your
		mobile phone does not ring when a call comes in to your desktop
		phone. You can select an allowed access list or blocked access list,
		but not both.
		– Mobile Phone—Select to allow your mobile phone can accept a call
		sent from your desktop phone.
		– Enable Mobile Connect—Select to allow your mobile phone to ring
		simultaneously with your desktop phone.
		– Smart Client Installed—Select to indicate that the remote destination
		you are setting up is a smartphone.
	6.	Click Save.

76 OL-15791-01