Cisco Systems 30 VIP manual Following debug messages show that the call is in progress

Page 66

Cisco IP Telephony Troubleshooting Guide for Cisco CallManager Release 3.0(1)

15:20:22.062 CCMStationD - stationOutputStartMediaTransmission tcpHandle=0x5138d98 myIP: e74610ac (172.16.70.231)

15:20:22.062 CCMStationD - RemoteIpAddr: e24610ac (172.16.70.226) RemoteRtpPortNumber: 16758

msecPacketSize: 20 compressionType:(4)Media_Payload_G711Ulaw64k

15:20:22.062 CCMLocations:Orig=0 BW=-1Dest=1 BW=6(-1 implies infinite bw available)

The following message shows that an on-hook message from the Cisco IP Phone (1001) is being received. As soon as an on-hook message is received, the H.225 and Skinny disconnect messages are sent and the entire H.225 message is seen. This final message indicates the call has been terminated.

15:20:27.296 CCMStationInit - InboundStim – OnHookMessageID tcpHandle=0x5138d98 15:20:27.296 CCMConnectionManager -wait_AuDisconnectRequest (16777247,16777248): STOP SESSION

15:20:27.296 CCMMediaManager - wait_AuDisconnectRequest - StopSession sending disconnect to (64,5) and remove connection from list

15:20:27.296 CCM Device SEP003094C26105 , UnRegisters with SDL Link to monitor NodeID= 1 15:20:27.296 CCMStationD - stationOutputCloseReceiveChannel tcpHandle=0x5138d98 myIP: e74610ac (172.16.70.231)

15:20:27.296 CCMStationD - stationOutputStopMediaTransmission tcpHandle=0x5138d98 myIP: e74610ac (172.16.70.231)

15:20:28.328 CCMIn Message -- H225ReleaseCompleteMsg -- Protocol= H225Protocol

Debug Messages and Show Commands on the Cisco IOS Gatekeeper

In the previous section, the Cisco CallManager SDI trace was discussed in detail. In the topology for this case study, “debug ras” has been turned on in the Cisco IOS Gatekeeper.

The following debug messages show that the Cisco IOS Gatekeeper is receiving the admission request (ARQ) for the Cisco CallManager (172.16.70.228), followed by other successful RAS messages. Finally, the Cisco IOS Gatekeeper sends an admission confirmed (ACF) message to the Cisco CallManager.

*Mar 12 04:03:57.181: RASLibRASRecvData ARQ (seq# 3365) rcvd from [172.16.70.228883] on sock [0x60AF038C]

*Mar 12 04:03:57.181: RASLibRAS_WK_TInit ipsock [0x60A7A68C] setup successful

*Mar 12 04:03:57.181: RASlibras_sendto msg length 16 from 172.16.70.2251719 to 172.16.70.228883

*Mar 12 04:03:57.181: RASLibRASSendACF ACF (seq# 3365) sent to 172.16.70.228

The following debug messages show that the call is in progress.

*Mar 12 04:03:57.181: RASLibRASRecvData successfully rcvd message of length 55 from 172.16.70.228883

The following debug messages shows that the Cisco IOS Gatekeeper has received a disengaged request (DRQ) from the Cisco CallManager (172.16.70.228), and the Cisco IOS Gatekeeper has sent a disengage confirmed (DCF) to the Cisco CallManager.

*Mar 12 04:03:57.181: RASLibRASRecvData DRQ (seq# 3366) rcvd from [172.16.70.228883] on sock [0x60AF038C]

© 2000 Cisco Systems, Inc.

66

Image 66
Contents SDI Trace Output Configuring Traces Reorder Tone Through Gateways Gateway Registration Problems Page Purpose Documentation Checklist Cisco IOS Cluster Acronym/Term Cnf Law mu-lawChannel Calling Search Space CCAPi Codec ChannelFlow Full duplex 711 729 225 245 323 Half Duplex Hookflash Jitter Law mu-lawPartition 931 Route Filter Route Group Route List Route PatternSilence Suppression Voice Activation Detection Translation Pattern Voice Activation Detection Silence Suppression VoIPCisco CallManager Administration Details Microsoft Performance View ReportMicrosoft Event Viewer SDI Trace Configuring Traces SDL Trace Page SDLTraceTypeFlag Value Definition SDLTraceDataFlag ValueSniffer Trace Call Detail Records CDR and Call Management Records CMRSelect Service Service Parameters CDRs Problem Categories Voice QualityPage Packet Number Time absolute ms Time delta ms Button Help John Check Your Loads Phone Resets Dropped Calls Page Page Cisco CallManager Feature Issues Locations Conf Bridge Region1 Region2 MTP Resource Problems MTP Dial Plans Dialing DOES-NOT-EXIST Page Name DialPlanWizardG ClausePattern Partition Pattern Device Name Device Description UsageSlow Server Response Reorder Tone Through GatewaysGateway Registration Problems CFG Booting Dhcp for dynamic configuration Module.portTracyclose mod port tracystart mod port TaskID Cmd show dhcp Gmsg ***TFTP Error File Not Found Gatekeeper Problems Gmsg CCM#0 CPEvent = Loadid -- CPState = LoadResponseRegistration Rejects RRJ Sample Topology Cisco IP Phone Initialization ProcessPage Skinny Station Registration Process Station IP Port Station ResetMessage Description Station Register AcknowledgePage Cisco CallManager Initialization Process Self-Starting Processes Cisco CallManager Registration Process Cisco CallManager KeepAlive Process Cisco CallManager Intra-Cluster Call Flow Traces Cisco Systems, Inc CCMStationD stationOutputStopTone tcpHandle=0x4fbbc30 Cisco Systems, Inc Call Flow Traces Page Cisco Systems, Inc Following debug messages show that the call is in progress Debug Messages and Show Commands on the Cisco IOS Gateway Gatekeeper Endpoint RegistrationCisco Systems, Inc Page Cisco IOS Gateway with T1/PRI Interface Cisco IOS Gateway with T1/CAS Interface Cisco Systems, Inc Inter-Cluster H.323 Communication Call Flow Traces Failed Call Flow Cisco Systems, Inc Writing Records Reading RecordsTable Schema Removing RecordsKnown Issues Fields in a Call Detail RecordDeciphering the Time Stamp Date/time of call origination Global Call IdentifierOrigination leg call identifier Originator’s node IDIP address for the originator’s media connection Isdn location valueCalling party cause Of call termination Port for the originator’s media connectionIP port to which the call was delivered Destination span or portIP address to which the call was delivered unsigned integer Called party’s partitionDate/time of connect IP address for the destination outgoing media connectionCodec type used by the destination on sending side Date/time of disconnect unsigned integerCall Identifier Global Call Identifier for this callCisco CallManager node identifier Directory number used on this callLost RTP packets during this connection Interarrival jitter during this connectionLatency experienced during this connection Normal Calls Cisco IP Phone-to-Cisco IP Phone Call Management Records Logged By Call Type Codec Types Compression / Payload types Codec Cause Codes DescriptionNumber changed Alarms Calling Cisco Technical Assistance Center TAC Index Debug messages and show commands Page Topology

30 VIP specifications

Cisco Systems has been a leading company in networking technology, and its suite of products is continually evolving to meet the demands of modern digital infrastructure. One of the latest introductions is the Cisco Systems 30 VIP, a highly advanced solution designed to enhance network performance and security for businesses of all sizes.

The Cisco Systems 30 VIP stands as a cornerstone for next-generation networking features, providing organizations with significant advantages in speed, reliability, and scalability. At the heart of the 30 VIP are key technologies such as advanced routing protocols and enhanced security measures that ensure seamless data transfer across multiple devices.

Main features of the Cisco Systems 30 VIP include its high throughput capabilities, which support accelerated data processing and lower latency. This is crucial for businesses that rely on real-time data exchange and cloud applications. Additionally, the device incorporates Multi-Protocol Label Switching (MPLS) technology, which optimizes data flow between networks and significantly enhances overall performance.

Another notable characteristic of the 30 VIP is its integrated security features, including advanced threat detection and prevention systems. These are designed to protect sensitive business data from cyber threats, ensuring operational continuity and compliance with industry regulations. The Cisco 30 VIP also supports secure access protocols, allowing for secure remote connections, which is increasingly vital in today’s hybrid work environment.

The adaptability of the Cisco Systems 30 VIP is another of its standout aspects. It offers compatibility with existing Cisco infrastructure, making it easier for businesses to adopt new technologies without overhauling their entire system. This modular approach allows for easy upgrades and integration of future technologies, ensuring long-term viability and investment protection.

Furthermore, the Cisco Systems 30 VIP is powered by intelligent network management software that simplifies monitoring, configuration, and troubleshooting processes. This software enhances network visibility, allowing administrators to identify and address potential issues proactively, thereby reducing downtime and enhancing user experience.

In summary, the Cisco Systems 30 VIP represents a significant advancement in network technology with its high throughput, integrated security features, adaptability, and intelligent management capabilities. These elements combine to provide a robust solution that meets the evolving needs of modern businesses while ensuring secure and efficient operations. As organizations continue to navigate an increasingly complex digital landscape, the Cisco Systems 30 VIP offers a future-proof option designed to facilitate growth and resilience.