Cisco Systems 30 VIP manual Number changed

Page 90

Cisco IP Telephony Troubleshooting Guide for Cisco CallManager Release 3.0(1)

Cause Code Descriptions

22

Number changed

26

Non-selected user clearing

27

Destination out of order

28

Invalid number format (address incomplete)

29

Facility rejected

30

Response to STATUS ENQUIRY

31

Normal, unspecified

34

No circuit/channel available

38

Network out of order

39

Permanent frame mode connection out of service

40

Permanent frame mode connection operational

41

Temporary failure

42

Switching equipment congestion

43

Access information discarded

44

Requested circuit/channel not available

46

Precedence call blocked

47

Resource unavailable, unspecified

49

Quality of Service not available

50

Requested facility not subscribed

53

Service operation violated

54

Incoming calls barred

55

Incoming calls barred within CUG (Closed User Group)

57

Bearer capability not authorized

58

Bearer capability not presently available

62

Inconsistency in designated outgoing access information and subscriber class

63

Service or option not available, unspecified

65

Bearer capability not implemented

66

Channel type not implemented

69

Requested facility not implemented

70

Only restricted digital information bearer capability is available (national use)

79

Service or option not implemented, unspecified

81

Invalid call reference value

82

Identified channel does not exist

83

A suspended call exists, but this call identity does not

84

Call identity in use

85

No call suspended

86

Call having the requested call identity has been cleared

87

User not member of CUG (Closed User Group)

88

Incompatible destination

90

Destination number missing and DC not subscribed

91

Invalid transit network selection (national use)

95

Invalid message, unspecified

96

Mandatory information element is missing

97

Message type non-existent or not implemented

98

Message is not compatible with the call state, or the message type is non-existent or

 

not implemented

99

An information element or parameter does not exist or is not implemented

100Invalid information element contents

101The message is not compatible with the call state

102The call was terminated when a timer expired and a recovery routine was executed to recover from the error

103Parameter non-existent or not implemented - passed on (national use)

110Message with unrecognized parameter discarded

© 2000 Cisco Systems, Inc.

90

Image 90
Contents SDI Trace Output Configuring Traces Reorder Tone Through Gateways Gateway Registration Problems Page Purpose Documentation Checklist Cisco IOS Cluster Acronym/Term Cnf Law mu-lawChannel Calling Search Space CCAPi Codec ChannelFlow Full duplex 711 729 225 245 323 Half Duplex Hookflash Jitter Law mu-lawPartition 931 Route Filter Route Group Route List Route PatternSilence Suppression Voice Activation Detection Translation Pattern Voice Activation Detection Silence Suppression VoIPCisco CallManager Administration Details Microsoft Performance View ReportMicrosoft Event Viewer SDI Trace Configuring Traces SDL Trace Page SDLTraceTypeFlag Value Definition SDLTraceDataFlag ValueSniffer Trace Call Detail Records CDR and Call Management Records CMRSelect Service Service Parameters CDRs Problem Categories Voice QualityPage Packet Number Time absolute ms Time delta ms Button Help John Check Your Loads Phone Resets Dropped Calls Page Page Cisco CallManager Feature Issues Locations Conf Bridge Region1 Region2 MTP Resource Problems MTP Dial Plans Dialing DOES-NOT-EXIST Page Name DialPlanWizardG ClausePattern Partition Pattern Device Name Device Description UsageSlow Server Response Reorder Tone Through GatewaysGateway Registration Problems CFG Booting Dhcp for dynamic configuration Module.portTracyclose mod port tracystart mod port TaskID Cmd show dhcp Gmsg ***TFTP Error File Not Found Gatekeeper Problems Gmsg CCM#0 CPEvent = Loadid -- CPState = LoadResponseRegistration Rejects RRJ Sample Topology Cisco IP Phone Initialization ProcessPage Skinny Station Registration Process Station IP Port Station ResetMessage Description Station Register AcknowledgePage Cisco CallManager Initialization Process Self-Starting Processes Cisco CallManager Registration Process Cisco CallManager KeepAlive Process Cisco CallManager Intra-Cluster Call Flow Traces Cisco Systems, Inc CCMStationD stationOutputStopTone tcpHandle=0x4fbbc30 Cisco Systems, Inc Call Flow Traces Page Cisco Systems, Inc Following debug messages show that the call is in progress Debug Messages and Show Commands on the Cisco IOS Gateway Gatekeeper Endpoint RegistrationCisco Systems, Inc Page Cisco IOS Gateway with T1/PRI Interface Cisco IOS Gateway with T1/CAS Interface Cisco Systems, Inc Inter-Cluster H.323 Communication Call Flow Traces Failed Call Flow Cisco Systems, Inc Writing Records Reading RecordsTable Schema Removing RecordsKnown Issues Fields in a Call Detail RecordDeciphering the Time Stamp Date/time of call origination Global Call IdentifierOrigination leg call identifier Originator’s node IDIP address for the originator’s media connection Isdn location valueCalling party cause Of call termination Port for the originator’s media connectionIP port to which the call was delivered Destination span or portIP address to which the call was delivered unsigned integer Called party’s partitionDate/time of connect IP address for the destination outgoing media connectionCodec type used by the destination on sending side Date/time of disconnect unsigned integerCall Identifier Global Call Identifier for this callCisco CallManager node identifier Directory number used on this callLost RTP packets during this connection Interarrival jitter during this connectionLatency experienced during this connection Normal Calls Cisco IP Phone-to-Cisco IP Phone Call Management Records Logged By Call Type Codec Types Compression / Payload types Codec Cause Codes DescriptionNumber changed Alarms Calling Cisco Technical Assistance Center TAC Index Debug messages and show commands Page Topology

30 VIP specifications

Cisco Systems has been a leading company in networking technology, and its suite of products is continually evolving to meet the demands of modern digital infrastructure. One of the latest introductions is the Cisco Systems 30 VIP, a highly advanced solution designed to enhance network performance and security for businesses of all sizes.

The Cisco Systems 30 VIP stands as a cornerstone for next-generation networking features, providing organizations with significant advantages in speed, reliability, and scalability. At the heart of the 30 VIP are key technologies such as advanced routing protocols and enhanced security measures that ensure seamless data transfer across multiple devices.

Main features of the Cisco Systems 30 VIP include its high throughput capabilities, which support accelerated data processing and lower latency. This is crucial for businesses that rely on real-time data exchange and cloud applications. Additionally, the device incorporates Multi-Protocol Label Switching (MPLS) technology, which optimizes data flow between networks and significantly enhances overall performance.

Another notable characteristic of the 30 VIP is its integrated security features, including advanced threat detection and prevention systems. These are designed to protect sensitive business data from cyber threats, ensuring operational continuity and compliance with industry regulations. The Cisco 30 VIP also supports secure access protocols, allowing for secure remote connections, which is increasingly vital in today’s hybrid work environment.

The adaptability of the Cisco Systems 30 VIP is another of its standout aspects. It offers compatibility with existing Cisco infrastructure, making it easier for businesses to adopt new technologies without overhauling their entire system. This modular approach allows for easy upgrades and integration of future technologies, ensuring long-term viability and investment protection.

Furthermore, the Cisco Systems 30 VIP is powered by intelligent network management software that simplifies monitoring, configuration, and troubleshooting processes. This software enhances network visibility, allowing administrators to identify and address potential issues proactively, thereby reducing downtime and enhancing user experience.

In summary, the Cisco Systems 30 VIP represents a significant advancement in network technology with its high throughput, integrated security features, adaptability, and intelligent management capabilities. These elements combine to provide a robust solution that meets the evolving needs of modern businesses while ensuring secure and efficient operations. As organizations continue to navigate an increasingly complex digital landscape, the Cisco Systems 30 VIP offers a future-proof option designed to facilitate growth and resilience.