| Setting the Volume 49 |
More About | ■ To place your part of a conference call on hold, press the Hold button. |
Conference Calls | The other parties can talk among themselves, but they cannot hear |
| you. Music on hold does not play when a conference call is on hold. |
■To transfer a conference call to another telephone, press the Transfer button. Dial the number to which you want to transfer the call, announce to the recipient (optionally) that you are transferring a conference call, and then press the Transfer button again. All of the conferenced parties are transferred except yourself.
■Your ability to drop the last person that you added to the conference is transferred to the person who accepts the transfer.
Disconnecting the Use the Conference Drop feature to disconnect the last person that you Last Person add to a conference call. This feature is helpful if, when you add a party,
That You Called your call is answered by someone else.
■Only the person who added the last caller to the conference call can drop that caller.
■Your administrator can configure any Access button on an NBX Business Telephone or the Attendant Console to be a Conference Drop button.
On an NBX Basic Telephone, or on an NBX Business Telephone that does not have a button programmed for Conference Drop:
1Press the Feature button and 431.
2The system returns you to the others who are in the conference call.
Setting the Volume On any NBX Telephone, use the Volume Control buttons to raise or lower the volume.
■Ring Volume — To raise or lower the volume of the ring, press the up or down Volume Control buttons repeatedly while your telephone is ringing, until the volume is at the level that you prefer. Ringer volume is different from ringer tone. See “Ringer Tones” in Chapter 6.
You can listen to and change the sound of the ringing on your telephone in NBX NetSet > Ringer Tones. See Chapter 1 for how to use the NBX NetSet utility.