3Com 2101 manual Paging next for details To retrieve a parked call

Paging 73

		b From an NBX Basic Telephone, press the hook switch. When you hear
		the dial tone, dial the user’s extension, or use the paging feature. See
		“Paging” next for details.
		To retrieve a parked call:
		1 Pick up the handset of any telephone on the system.
		2 Dial the Call Park extension that was assigned to the call.
Paging		Depending on your location and equipment, you can broadcast a
		message in one of three ways, as described in Table 13.
		1 Pick up the handset.
		2 Dial the paging extension as shown in Table 13).
		3 Speak into the NBX Telephone handset and then hang up.
		Do not press the Feature button before you dial the Paging extension.
	Table 13	Paging Extension
	Feature		NBX 100	SuperStack 3 NBX
			(default extension)	(default extensions)
	External Paging		620	6200
	Broadcast an announcement over a public address
	system that has a paging amplifier and speaker
	system that is connected to your NBX system
	Internal Paging		621	6201
	Broadcast an announcement through the speakers
	on all NBX® Telephones on your system
	Simultaneous Paging		622	6202
	Broadcast an announcement externally and
	internally at the same time

Dialing a Call to a You can dial calls between sites that are separated geographically but

Remote Office that are linked by a Wide Area Network (WAN) connection. Typical configurations are described in the next sections.

Using Unique In the sample network shown in Figure 6, each site must have unique Extensions telephone extensions. Whenever you make a call to an extension not located at your own site, your NBX system sets up a connection to the

appropriate site.