Samsung DCS | Keyset User Guide |
Receiving OHVA Calls
If you receive an
•Press the flashing CALL key on your keyset. This will place the current call on hold and allow you to talk to the announcing party.
•To return to your original call, press the key corresponding to your original call. This will disconnect the OHVA call.
OHVA Block
Your keyset can be programmed with an OHVA BLOCK (OHBLK) key. Pressing this key will prevent anyone from making an OHVA call to you until you press the key again and cancel the blocking.
OHVA Reject
Your keyset can be programmed with an OHVA REJECT (REJECT) key. Pressing this key while receiving an OHVA call will disconnect the voice announcing party and return you to your original call.
In/Out of Group
If your keyset is assigned to a station ring group, you can remove your keyset from the group. While you are out of the group, you can receive calls to your extension number but not calls to the group number.
If you have an IG (or IN/OUT) key programmed:
•Press the IN/OUT key. It will light red when your keyset is in the group.
•Press the IN/OUT key again to exit the group and turn the light off.
–46 –