PROGRAMMING
11. Auto Mute Enable/Disable
Default Setting: Disable
This feature prevents unauthorized eavesdropping when someone makes a single page to you.
Note: For intercom page with handsfree reply at your exten- sion, Auto Mute must be set to Disable.
1.Press PROGRAM.
2.Press VOLUME 
until the display shows:
3.Press MUTE (ENTER) .The display shows:
4.Press 
VOLUME 
to choose be- tween the enable or disable setting.
5.Press MUTE (ENTER).
12. Flash
Default Setting: 0.7 seconds
Range: 0.1 seconds to 1.2 seconds
This feature is typically used to access custom calling service. You may also use Flash to end a call without hanging up the handset or pressing SPEAKER.
1.Press PROGRAM.
2.Press VOLUME 
until the display shows:
3.Press MUTE (ENTER). The display shows:
4.Press 
VOLUME 
to choose the flash length.
5.Press MUTE (ENTER) to save.
13. Speed Dial
You can store eighteen (18) frequently dialed numbers in a speed dial bin by pressing the appropriate speed dial button during programming.
A number stored in the Called ID memory can be stored in a speed dial bin. You can store numbers in either pulse or tone dialing modes. Pauses and flashes may also be stored in memory. Each speed dial bin can store up to 16 digits (numbers) including pause, tone, and flash.
13.1Storing a Telephone Number in Speed Dial
1.Press PROGRAM.
2.Press SPEED DIAL Button 1. The display shows:
3.Press MUTE (ENTER). The display shows:
17