PROGRAMMING
4.Dial the number (digi) you want to store.
5.Press MUTE (ENTER) to save.
Repeat step 2 and press another speed dial button to continue programming speed dial numbers.
13.2 Storing a Caller ID Number
1.Display the number in the caller ID list. (Refer to Caller ID Operation).
2.Press PROGRAM.
3.Press the SPEED DIAL button.
4.Press MUTE (ENTER).
5.Press CID.
6.Press MUTE (ENTER) to save.
13.3Erasing the Contents of a Speed Dial Bin
1.Press PROGRAM.
2.Press the SPEED DIAL button.
3.Press MUTE (ENTER) .
4.Press ERASE twice. For example, if you are deleting the contents of bin 10, the display will show:
14.Line In Use Detection
Default Setting: Enable
This feature allows the speakerphone to detect other telephone devices us- ing any of the four telephone lines. The speakerphone indicates
ing to the
1.Press PROGRAM.
2.Press VOLUME until the display shows:
3.Press MUTE (ENTER) .The display shows:
4.Press VOLUME to choose set- ting.
5.Press MUTE (ENTER) .
15. Reset default Values
You may clear all the programmed data, and reset all parameters back to the original factory default values.
1.Press PROGRAM.
2.Press VOLUME until the display shows:
3.Press MUTE (ENTER) .The display shows:
18