3Com VCX V7000 IP manual Remote Call, Forward, Press Feature +

Remote Call Forward 71

call park, for example), blocking is disabled and the call can be monitored. If the call is reconnected (for a park timeout, for example), blocking is disabled and the call can be monitored.

■ Blocking is effective only for calls that can be monitored. For example, invoking monitor blocking for a conference call has no effect on the call because conference calls cannot be monitored.

To block call monitoring on an agent extension to make a private call:

1 Pick up the handset.

2 Press Feature + 429.

The Display Panel shows the following prompt:

Enter the phone number:

Press # to complete!

3 Enter the extension of the private call and press #.

	Alternatively you can combine steps 2 and 3 by using the following single
	command after picking up the handset:
	*429*<extension>
	For <extension>, you can either enter the private phone extension or
	press a speed dial button mapped to that extension.
Remote Call	The Remote Call Forward feature allows you to configure the forwarding
Forward	options of a phone from another phone in the network. This is useful if,
	for example, a person A is on vacation and all of person A’s calls must be
	forwarded to person B. This feature enables person B to configure Call
	Forward Universal on the source phone (person A). Note that person A
	can be at one site and person B can be at a different site.
	The VCX administrator must authorize use of the Remote Call Forward
	feature. For example, if the administrator authorizes you to change
	person A’s forwarding options, you can enter a feature code (468) and
	redirect person A’s calls to any other extension, including your own.
	When successfully configured, the remote (destination) phone’s LED (if
	available) will flash for all forwarded calls, and the LCD will also display a
	call forward message.