AT&T CL4939 user manual Two-touch memory overview and storage, Two-touch memory storage

Two-touch memory

ENTER LOCATION

_

12:00AM11-20 15

ENTER NUMBER

8887227702_

12:00AM11-20 15

ENTER LOCATION

_

12:00AM11-20 15

STORED

12:00AM11-20 15

Two-touch memory overview and storage

Two-touch memory overview

This telephone has 10 two-touch memory locations (speed dial locations) where you can store telephone numbers you wish to dial using fewer keys than usual.

Each two-touch memory location can store a telephone number with up to 24 digits.

Two-touch memory storage

Use the following steps to store a telephone number in a desired two-touch memory location.

1.When the telephone is idle, press MEM. The screen shows ENTER LOCATION.

2.Press SELECT, the screen displays

ENTER NUMBER.

3.To copy the last number dialed, press REDIAL/PAUSE (up to 24 digits).

-OR-

Use the dial pad keys to enter the telephone number (up to 24 digits).

•To backspace and erase a digit, press REMOVE.

•To insert a four-second dialing pause, press REDIAL/PAUSE. A P appears on the screen.

4.Press MEM or SELECT. The screen shows

ENTER LOCATION.

5.Press a dial pad key (0 through 9) to choose the desired two-touch memory location for the new entry. The screen shows STORED with a confirmation tone and then returns to idle mode.

NOTES:

•If you enter more than 24 digits in step 3, the screen shows ONLY 24 ALLOWED with an error tone.

•If the two-touch memory location you selected in step 5 is occupied, the new telephone number replaces the old one. Take caution not to replace entries you do not wish to delete from the two-touch memory locations.

27