AT&T CL4939 user manual Storing a call history entry in a two- touch location

Caller ID operation

CHRISTINE SMITH

888-722-7702

16 12:00AM11-20 15

ENTER LOCATION

_

12:00AM11-20 15

STORED

12:00AM11-20 15

Storing a call history entry in a two- touch location

Use the following steps to store the telephone number of a call history entry in a two-touch memory location.

1.When the telephone is idle, press CID/ to enter the call history.

2.Press DIR/ or CID/ to scroll to the desired caller ID entry.

3.Press MEM. The screen shows

ENTER LOCATION.

-OR-

If you need to add or remove the area code or a 1 at the beginning of the number, do the following:

a.Press SELECT continually to scroll through the various dialing formats (area code + seven-digit number, 1 + area code + seven- digit number, seven-digit number or 1 + seven-digit number).

b.Press MEM. The screen shows

ENTER LOCATION.

4.Press a dial pad key (0 through 9) to choose the desired two-touch memory location to save the displayed telephone number. The screen shows STORED with a confirmation tone and then returns to the call history.

5.Press FLASH to return to idle mode.

NOTES:

•If there is no telephone number in the displayed call history entry when you press MEM in step 3, the telephone plays an error tone.

•If the two-touch memory location you selected in step 4 above is occupied, the new telephone number replaces the old one. Take caution not to replace entries you do not wish to delete from the two-touch memory locations.

40