AT&T 944 user manual Connect the power adapter to the telephone, Mount the phone on the wall

Page 11

INSTALLATION

5Connect the handset cord.

Plug one end of the coiled handset cord into the jack on the left side of the phone. Plug the other end into the handset, and hang up.

6Connect the power adapter to the telephone.

Use only the power adapter provided with this product. To obtain a replacement, call 1 800 222–3111.

Plug one end of the power adapter into the jack labeled POWER on the back of the phone.

NOTE: The screen will display POWERFAIL the first time you plug in the phone. Press any key to clear the screen.

7Check for dial tone.

Lift the handset and listen for a dial tone. If you cannot hear a dial tone, turn to IN CASE OF DIFFICULTY.

8Mount the phone on the wall.

• Four One-Line Jacks

Modular

Telephone Jacks

Lines 3 and 4

Power Cord

Standard

Electrical

Outlet

Modular Telephone Jacks

Lines 1 and 2

Image 11

Contents Part 1 Important Product Information Four-Line Intercom SpeakerphoneContents Before YOU Begin Glossary Feature Function Setting Options Features ListWhen you hear It means Audible SignalsInstall one 9V battery InstallationTable/Desk Installation Two Two-Line Jacks Connect the telephone line cords to the telephoneWall Installation Install one 9V battery Mount the phone on the wall Connect the power adapter to the telephoneTwo Two-Line Jacks Convenience Ports Feature Options Feature SET UPTurn the Ringer On or Off for Each Line Set the Time/DateAssign an Extension Number to Your Phone Turn Line Usage On or Off for Each Line Set Delay RingSelect the Ringer Type Turn Auto-Mute On or Off Assign the Prime Line Line PreferenceAssign the Line Group for this Phone Turn Hold Reminder On or Off Set Audio ModeSet the Dial Mode Set the Flash TimeSet Your Phone to be the Centrex Console Phone Program the Centrex Console Delayed Ring TimeErase All Settings and Return the Phone to Default Settings Telephone Operation Speakerphone Telephone OperationMaking or Answering a Call HandsetPause TimerSwitching Modes Restoring Call Privacy Canceling Call PrivacyCall Privacy Do Not DisturbRedial VolumeLine-in-Use Lights Speakerphone or Headset Switch Between LinesAuto Redial HoldConference Calls MuteFlash Temporary Tone DialingTo drop one line Low Battery IndicatorTransfer a Call To talk privately with one partySpeed Dial Operation Making a Speed Dial Call Storing a Number in a Speed Dial LocationReviewing a Speed Dial Entry Intercom Operation Making an Intercom Call with the Handset Basic Intercom OperationsMaking a Single-phone Switching Between an Intercom Call and a Single-phoneMaking an Intercom Call with the Speakerphone or Headset Answering an Intercom CallRoom Monitor Paging All PhonesAnswering a System-wide Making an Intercom Conference CallAdding a FAX Machine Using a Fax SwitchTelephone Does Not Ring Intercom Paging Signal Not ReceivedLine Lights Remain On When No Line is Connected Case of DifficultyDisplay Screen is Blank Tone Signals Do Not Activate a Remote DeviceOperation During a Power Failure Line Groups Expanding the Phone SystemPrivate Lines Console Operation Setup ChecklistCentrex Operation Enabling the Console PhonePicking Up Another Station’s Line Setting Ring Delay DurationAnswering a Delayed Ring Index Audio Mode 4Reset ALL Advanced American Telephones. All rights reserved