AT&T 944 user manual Convenience Ports

Page 13

INSTALLATION

Convenience Ports

If you want to connect another device (such as a modem or fax machine) to the wall jack, you can use the jacks on the phone labeled AUX. These convenience ports use Lines 3 and 4; a call picked up on Line 3 or 4 at another extension may interrupt fax, modem, or message transmission.

•Four One-Line Jacks

Modular

Telephone

Jacks

Lines 3 and

4with Two-line Adapter

Telephone Jack Aux L4

Telephone Jack Aux L3

Modular Telephone Jacks

Lines 1 and 2 with

Two-line Adapter

Standard

Electrical

Outlet

Power Cord

Telephone Jack L1/L2

Telephone Jack L3/L4

•Two Two-Line Jacks

Modular

Telephone Jack

Lines 3 and 4

Telephone Jack Aux L4 Telephone Jack Aux L3

Modular

Telephone Jack

Lines 1 and 2

Standard

Electrical

Outlet

Power Cord

Telephone Jack L1/L2

Telephone Jack L3/L4

12

Image 13

Contents Part 1 Important Product Information Four-Line Intercom SpeakerphoneContents Before YOU Begin Glossary Feature Function Setting Options Features ListWhen you hear It means Audible SignalsTable/Desk Installation InstallationInstall one 9V battery Two Two-Line Jacks Connect the telephone line cords to the telephoneWall Installation Install one 9V battery Mount the phone on the wall Connect the power adapter to the telephoneTwo Two-Line Jacks Convenience Ports Feature Options Feature SET UPAssign an Extension Number to Your Phone Set the Time/DateTurn the Ringer On or Off for Each Line Select the Ringer Type Set Delay RingTurn Line Usage On or Off for Each Line Assign the Line Group for this Phone Assign the Prime Line Line PreferenceTurn Auto-Mute On or Off Set the Dial Mode Set Audio ModeSet the Flash Time Turn Hold Reminder On or OffErase All Settings and Return the Phone to Default Settings Program the Centrex Console Delayed Ring TimeSet Your Phone to be the Centrex Console Phone Telephone Operation Making or Answering a Call Telephone OperationHandset SpeakerphoneSwitching Modes TimerPause Call Privacy Canceling Call PrivacyDo Not Disturb Restoring Call PrivacyLine-in-Use Lights VolumeRedial Auto Redial Switch Between LinesHold Speakerphone or HeadsetFlash MuteTemporary Tone Dialing Conference CallsTransfer a Call Low Battery IndicatorTo talk privately with one party To drop one lineSpeed Dial Operation Reviewing a Speed Dial Entry Storing a Number in a Speed Dial LocationMaking a Speed Dial Call Intercom Operation Making an Intercom Call with the Handset Basic Intercom OperationsMaking an Intercom Call with the Speakerphone or Headset Switching Between an Intercom Call and a Single-phoneAnswering an Intercom Call Making a Single-phoneAnswering a System-wide Paging All PhonesMaking an Intercom Conference Call Room MonitorAdding a FAX Machine Using a Fax SwitchLine Lights Remain On When No Line is Connected Intercom Paging Signal Not ReceivedCase of Difficulty Telephone Does Not RingOperation During a Power Failure Tone Signals Do Not Activate a Remote DeviceDisplay Screen is Blank Line Groups Expanding the Phone SystemPrivate Lines Centrex Operation Setup ChecklistEnabling the Console Phone Console OperationAnswering a Delayed Ring Setting Ring Delay DurationPicking Up Another Station’s Line Index Audio Mode 4Reset ALL Advanced American Telephones. All rights reserved