AT&T 944 user manual Set Your Phone to be the Centrex Console Phone

Page 19

FEATURE SET UP

You will need to program the next two features if this phone is the designated Console Phone for your Centrex system:

Set Your Phone to be the Centrex Console Phone

NOTE: This feature is for use with Centrex systems only.

1Press G.

2Press -until the screen displays CONSOLE, then press >.

3Press -or +to change the setting.

4Press Sto confirm your selection.

Program the Centrex Console Delayed Ring Time

NOTE: This feature is for use with Centrex systems only.

Set the length of time the phone will route your calls to the Centrex Console phone. One ring is about six seconds.

1Press G.

2Press -until the screen displays CSL DELAY RING, then press >.

3Press -or +to select the desired setting.

4Press Sto confirm your selection.

Erase All Settings and Return the Phone to Default Settings

1Press G.

2Press -until the screen displays RESET ALL.

3Press >. The screen displays:

4Press 7within three seconds to confirm the RESET ALL command. The screen displays:

Image 19

Contents Part 1 Important Product Information Four-Line Intercom SpeakerphoneContents Before YOU Begin Glossary Feature Function Setting Options Features ListWhen you hear It means Audible SignalsTable/Desk Installation InstallationInstall one 9V battery Two Two-Line Jacks Connect the telephone line cords to the telephoneWall Installation Install one 9V battery Mount the phone on the wall Connect the power adapter to the telephoneTwo Two-Line Jacks Convenience Ports Feature Options Feature SET UPAssign an Extension Number to Your Phone Set the Time/DateTurn the Ringer On or Off for Each Line Select the Ringer Type Set Delay RingTurn Line Usage On or Off for Each Line Assign the Line Group for this Phone Assign the Prime Line Line PreferenceTurn Auto-Mute On or Off Turn Hold Reminder On or Off Set Audio ModeSet the Dial Mode Set the Flash TimeErase All Settings and Return the Phone to Default Settings Program the Centrex Console Delayed Ring TimeSet Your Phone to be the Centrex Console Phone Telephone Operation Speakerphone Telephone OperationMaking or Answering a Call HandsetSwitching Modes TimerPause Restoring Call Privacy Canceling Call PrivacyCall Privacy Do Not DisturbLine-in-Use Lights VolumeRedial Speakerphone or Headset Switch Between LinesAuto Redial HoldConference Calls MuteFlash Temporary Tone DialingTo drop one line Low Battery IndicatorTransfer a Call To talk privately with one partySpeed Dial Operation Reviewing a Speed Dial Entry Storing a Number in a Speed Dial LocationMaking a Speed Dial Call Intercom Operation Making an Intercom Call with the Handset Basic Intercom OperationsMaking a Single-phone Switching Between an Intercom Call and a Single-phoneMaking an Intercom Call with the Speakerphone or Headset Answering an Intercom CallRoom Monitor Paging All PhonesAnswering a System-wide Making an Intercom Conference CallAdding a FAX Machine Using a Fax SwitchTelephone Does Not Ring Intercom Paging Signal Not ReceivedLine Lights Remain On When No Line is Connected Case of DifficultyOperation During a Power Failure Tone Signals Do Not Activate a Remote DeviceDisplay Screen is Blank Line Groups Expanding the Phone SystemPrivate Lines Console Operation Setup ChecklistCentrex Operation Enabling the Console PhoneAnswering a Delayed Ring Setting Ring Delay DurationPicking Up Another Station’s Line Index Audio Mode 4Reset ALL Advanced American Telephones. All rights reserved