AT&T 944 Set Audio Mode, Set the Dial Mode, Set the Flash Time, Turn Hold Reminder On or Off

Page 18

FEATURE SET UP

Set Audio Mode

Choose the mode (speakerphone or headset) the phone will automatically use to make and answer calls when the handset is in the cradle.

1Press G.

2Press -until the screen displays AUDIO MODE, then press >.

3Press -or +to change the setting.

4Press Sto store your selection.

NOTE: If you have programmed headset as the default mode but the headset is not plugged in, the phone will switch to speakerphone.

Set the Dial Mode

1Press G.

2Press -until the screen displays TONE/PULSE, then press >.

3Press -or +to change the setting.

4Press Sto store your selection.

Set the Flash Time

NOTE: If you are using this phone within the United States, there is no need to change the Flash Time from the default setting (0.7 seconds).

1Press G.

2Press -until the screen displays FLASH TIME, then press >.

3Press -or +to select the desired setting.

4Press Sto store your selection.

Turn Hold Reminder On or Off

1Press G.

2Press -until the screen displays HOLD REMINDER, then press >.

3Press -or +to change the setting.

4Press Sto store your selection.

17

Image 18

Contents Four-Line Intercom Speakerphone Part 1 Important Product InformationContents Before YOU Begin Glossary Features List Feature Function Setting OptionsAudible Signals When you hear It meansInstallation Table/Desk InstallationInstall one 9V battery Connect the telephone line cords to the telephone Two Two-Line JacksWall Installation Install one 9V battery Connect the power adapter to the telephone Mount the phone on the wallTwo Two-Line Jacks Convenience Ports Feature SET UP Feature OptionsSet the Time/Date Assign an Extension Number to Your PhoneTurn the Ringer On or Off for Each Line Set Delay Ring Select the Ringer TypeTurn Line Usage On or Off for Each Line Assign the Prime Line Line Preference Assign the Line Group for this PhoneTurn Auto-Mute On or Off Set the Flash Time Set Audio ModeSet the Dial Mode Turn Hold Reminder On or OffProgram the Centrex Console Delayed Ring Time Erase All Settings and Return the Phone to Default SettingsSet Your Phone to be the Centrex Console Phone Telephone Operation Handset Telephone OperationMaking or Answering a Call SpeakerphoneTimer Switching ModesPause Do Not Disturb Canceling Call PrivacyCall Privacy Restoring Call PrivacyVolume Line-in-Use LightsRedial Hold Switch Between LinesAuto Redial Speakerphone or HeadsetTemporary Tone Dialing MuteFlash Conference CallsTo talk privately with one party Low Battery IndicatorTransfer a Call To drop one lineSpeed Dial Operation Storing a Number in a Speed Dial Location Reviewing a Speed Dial EntryMaking a Speed Dial Call Intercom Operation Basic Intercom Operations Making an Intercom Call with the HandsetAnswering an Intercom Call Switching Between an Intercom Call and a Single-phoneMaking an Intercom Call with the Speakerphone or Headset Making a Single-phoneMaking an Intercom Conference Call Paging All PhonesAnswering a System-wide Room MonitorUsing a Fax Switch Adding a FAX MachineCase of Difficulty Intercom Paging Signal Not ReceivedLine Lights Remain On When No Line is Connected Telephone Does Not RingTone Signals Do Not Activate a Remote Device Operation During a Power FailureDisplay Screen is Blank Expanding the Phone System Line GroupsPrivate Lines Enabling the Console Phone Setup ChecklistCentrex Operation Console OperationSetting Ring Delay Duration Answering a Delayed RingPicking Up Another Station’s Line Audio Mode 4 IndexReset ALL Advanced American Telephones. All rights reserved