AT&T 944 user manual Basic Intercom Operations, Making an Intercom Call with the Handset

Page 31

INTERCOM OPERATION

This intercom features both a single-phone page and a system-wide page. A single-phone page alerts only one phone; a system-wide page alerts all phones. Any phone with the Do Not Disturb (DND) feature activated will not receive a page.

An intercom call rings at the extension called with a repeating double-ring pattern.

A single-phone page automatically activates the speakerphone on the receiving phone. You can deactivate the speakerphone by lifting the handset.

NOTE: If a line is in use, pressing Ior pwill place the line on hold and activate the intercom.

Basic Intercom Operations

INTERCOM

Any two stations connected to Line 1 can ring each other.

PAGE

Lets you “announce” over the speaker of the phone

 

you’re calling. The person you’ve called can respond

 

just by talking.

PAGE ALL

Lets you “announce” to all phones in the system at the

 

same time (system-wide page).

CONFERENCE

Lets you connect another intercom call with an outside line.

Making an Intercom Call with the Handset

1Press Iand lift the handset. The screen displays ICM.

2Dial the extension number of the party you wish to reach. If that extension is idle, you will hear long beeps. If that extension is busy, you will hear a busy signal. If that extension is set to Do Not Disturb, you will hear short beeps.

NOTE: The intercom call is automatically cancelled if you do not dial an extension within 10 seconds.

NOTE: When you direct an intercom call to one extension, any extension in the system can answer the call by pressing I.

30

Image 31
Contents Part 1 Important Product Information Four-Line Intercom SpeakerphoneContents Before YOU Begin Glossary Feature Function Setting Options Features ListWhen you hear It means Audible SignalsTable/Desk Installation InstallationInstall one 9V battery Two Two-Line Jacks Connect the telephone line cords to the telephoneWall Installation Install one 9V battery Mount the phone on the wall Connect the power adapter to the telephoneTwo Two-Line Jacks Convenience Ports Feature Options Feature SET UPAssign an Extension Number to Your Phone Set the Time/DateTurn the Ringer On or Off for Each Line Select the Ringer Type Set Delay RingTurn Line Usage On or Off for Each Line Assign the Line Group for this Phone Assign the Prime Line Line PreferenceTurn Auto-Mute On or Off Turn Hold Reminder On or Off Set Audio ModeSet the Dial Mode Set the Flash TimeErase All Settings and Return the Phone to Default Settings Program the Centrex Console Delayed Ring TimeSet Your Phone to be the Centrex Console Phone Telephone Operation Speakerphone Telephone OperationMaking or Answering a Call HandsetSwitching Modes TimerPause Restoring Call Privacy Canceling Call PrivacyCall Privacy Do Not DisturbLine-in-Use Lights VolumeRedial Speakerphone or Headset Switch Between LinesAuto Redial HoldConference Calls MuteFlash Temporary Tone DialingTo drop one line Low Battery IndicatorTransfer a Call To talk privately with one partySpeed Dial Operation Reviewing a Speed Dial Entry Storing a Number in a Speed Dial LocationMaking a Speed Dial Call Intercom Operation Making an Intercom Call with the Handset Basic Intercom OperationsMaking a Single-phone Switching Between an Intercom Call and a Single-phoneMaking an Intercom Call with the Speakerphone or Headset Answering an Intercom CallRoom Monitor Paging All PhonesAnswering a System-wide Making an Intercom Conference CallAdding a FAX Machine Using a Fax SwitchTelephone Does Not Ring Intercom Paging Signal Not ReceivedLine Lights Remain On When No Line is Connected Case of DifficultyOperation During a Power Failure Tone Signals Do Not Activate a Remote DeviceDisplay Screen is Blank Line Groups Expanding the Phone SystemPrivate Lines Console Operation Setup ChecklistCentrex Operation Enabling the Console PhoneAnswering a Delayed Ring Setting Ring Delay DurationPicking Up Another Station’s Line Index Audio Mode 4Reset ALL Advanced American Telephones. All rights reserved