AT&T 944 user manual Assign the Prime Line Line Preference, Assign the Line Group for this Phone

Page 17

FEATURE SET UP

Assign the Prime Line (Line Preference)

1Press G.

2Press -until the screen displays PRIME LINE, then press >.

3Press -or +to select the desired setting.

4Press Sto store your selection.

Assign the Line Group for this Phone

1Press G.

2Press -until the screen displays LINE GROUP, then press >.

3Press -or +to select the desired setting.

4Press Sto store your selection.

Turn Auto-Mute On or Off

Choose whether sounds at this extension will be heard automatically in response to a page (Auto-Mute Off) or only when Mis pressed. Auto-Mute Off permits hands-free conversation and room monitoring; Auto-Mute On protects privacy.

1Press G.

2Press -until the screen displays AUTO MUTE, then press >.

3Press -or +to change the setting.

4Press Sto store your selection.

Image 17

Contents Part 1 Important Product Information Four-Line Intercom SpeakerphoneContents Before YOU Begin Glossary Feature Function Setting Options Features ListWhen you hear It means Audible SignalsInstall one 9V battery InstallationTable/Desk Installation Two Two-Line Jacks Connect the telephone line cords to the telephoneWall Installation Install one 9V battery Mount the phone on the wall Connect the power adapter to the telephoneTwo Two-Line Jacks Convenience Ports Feature Options Feature SET UPTurn the Ringer On or Off for Each Line Set the Time/DateAssign an Extension Number to Your Phone Turn Line Usage On or Off for Each Line Set Delay RingSelect the Ringer Type Turn Auto-Mute On or Off Assign the Prime Line Line PreferenceAssign the Line Group for this Phone Set the Dial Mode Set Audio ModeSet the Flash Time Turn Hold Reminder On or OffSet Your Phone to be the Centrex Console Phone Program the Centrex Console Delayed Ring TimeErase All Settings and Return the Phone to Default Settings Telephone Operation Making or Answering a Call Telephone OperationHandset SpeakerphonePause TimerSwitching Modes Call Privacy Canceling Call PrivacyDo Not Disturb Restoring Call PrivacyRedial VolumeLine-in-Use Lights Auto Redial Switch Between LinesHold Speakerphone or HeadsetFlash MuteTemporary Tone Dialing Conference CallsTransfer a Call Low Battery IndicatorTo talk privately with one party To drop one lineSpeed Dial Operation Making a Speed Dial Call Storing a Number in a Speed Dial LocationReviewing a Speed Dial Entry Intercom Operation Making an Intercom Call with the Handset Basic Intercom OperationsMaking an Intercom Call with the Speakerphone or Headset Switching Between an Intercom Call and a Single-phoneAnswering an Intercom Call Making a Single-phoneAnswering a System-wide Paging All PhonesMaking an Intercom Conference Call Room MonitorAdding a FAX Machine Using a Fax SwitchLine Lights Remain On When No Line is Connected Intercom Paging Signal Not ReceivedCase of Difficulty Telephone Does Not RingDisplay Screen is Blank Tone Signals Do Not Activate a Remote DeviceOperation During a Power Failure Line Groups Expanding the Phone SystemPrivate Lines Centrex Operation Setup ChecklistEnabling the Console Phone Console OperationPicking Up Another Station’s Line Setting Ring Delay DurationAnswering a Delayed Ring Index Audio Mode 4Reset ALL Advanced American Telephones. All rights reserved