AT&T 944 Select the Ringer Type, Set Delay Ring, Turn Line Usage On or Off for Each Line

Page 16

FEATURE SET UP

Select the Ringer Type

1Press G.

2Press -until the screen displays RINGER TYPE, then press >.

3Press -or +to select the desired setting. You will hear a sample of each ringer type as you move through the settings.

4Press Sto store your selection.

Set Delay Ring

Set the length of time before incoming calls will ring at this extension.

1Press G.

2Press -until the screen displays DELAY RING, then press >.

3Press -or +to select the desired setting. (One ring is about six seconds.)

4Press Sto store your selection.

Turn Line Usage On or Off for Each Line

If you are not using all four phone lines, you need to turn off Line Usage for the unused lines. If you expand to a third or fourth line, turn Line Usage back on.

You may also restrict the use of certain lines on this phone to intercom and paging only, by turning off Line Usage for each line to be restricted. When Line Usage is turned off, that line cannot be used to answer incoming calls or to make outgoing or transfer calls.

1Press G.

2Press -until the screen displays LINE USAGE, then press >.

3Press -or +until the screen displays the desired line number, then press >.

4Press -or +to change the setting.

5Press Sto store your selection.

6Repeat Steps 1-5to change the Line Usage status for additional lines.

15

Image 16

Contents Four-Line Intercom Speakerphone Part 1 Important Product InformationContents Before YOU Begin Glossary Features List Feature Function Setting OptionsAudible Signals When you hear It meansTable/Desk Installation InstallationInstall one 9V battery Connect the telephone line cords to the telephone Two Two-Line JacksWall Installation Install one 9V battery Connect the power adapter to the telephone Mount the phone on the wallTwo Two-Line Jacks Convenience Ports Feature SET UP Feature OptionsAssign an Extension Number to Your Phone Set the Time/DateTurn the Ringer On or Off for Each Line Select the Ringer Type Set Delay RingTurn Line Usage On or Off for Each Line Assign the Line Group for this Phone Assign the Prime Line Line PreferenceTurn Auto-Mute On or Off Set Audio Mode Set the Dial ModeSet the Flash Time Turn Hold Reminder On or OffErase All Settings and Return the Phone to Default Settings Program the Centrex Console Delayed Ring TimeSet Your Phone to be the Centrex Console Phone Telephone Operation Telephone Operation Making or Answering a CallHandset SpeakerphoneSwitching Modes TimerPause Canceling Call Privacy Call PrivacyDo Not Disturb Restoring Call PrivacyLine-in-Use Lights VolumeRedial Switch Between Lines Auto RedialHold Speakerphone or HeadsetMute FlashTemporary Tone Dialing Conference CallsLow Battery Indicator Transfer a CallTo talk privately with one party To drop one lineSpeed Dial Operation Reviewing a Speed Dial Entry Storing a Number in a Speed Dial LocationMaking a Speed Dial Call Intercom Operation Basic Intercom Operations Making an Intercom Call with the HandsetSwitching Between an Intercom Call and a Single-phone Making an Intercom Call with the Speakerphone or HeadsetAnswering an Intercom Call Making a Single-phonePaging All Phones Answering a System-wideMaking an Intercom Conference Call Room MonitorUsing a Fax Switch Adding a FAX MachineIntercom Paging Signal Not Received Line Lights Remain On When No Line is ConnectedCase of Difficulty Telephone Does Not RingOperation During a Power Failure Tone Signals Do Not Activate a Remote DeviceDisplay Screen is Blank Expanding the Phone System Line GroupsPrivate Lines Setup Checklist Centrex OperationEnabling the Console Phone Console OperationAnswering a Delayed Ring Setting Ring Delay DurationPicking Up Another Station’s Line Audio Mode 4 IndexReset ALL Advanced American Telephones. All rights reserved