
PROGRAM 5550100 ![]()
PAUSE
PROGRAM 5550100 ![]()
TONE
PROGRAM 5550100 ![]()
FLASH
PROGRAM 5550100 ![]()
DELETE CHAR
PROGRAM 5550100 ![]()
CANCEL
One touch
Continued from previous page
•Store a signal for switching to temporary tone dialing. If you have dial pulse (rotary) service, this signal is required for some special services. Press [
] or [
] until you see TONE, then press [ENTER]. A T appears on the screen. All numbers you enter after this will send
•You can store the flash signal required by some special services as part of a dialing sequence. Press [
] or [
] until you see FLASH, then press [ENTER]. An F appears on the screen. Continue storing the number as usual.
•To erase the last digit, scroll to DELETE CHAR and then press [ENTER].
Press [REMOVE].
•To copy the most recently dialed number from redial, press [(AUTO) REDIAL]. You can copy only the last number dialed from this extension to a
•To cancel programming, scroll to CANCEL and then press [ENTER].
5.Press the desired
Press [LOWER], then the desired
6.To move to the next feature, press [
].
To exit, press and hold [ENTER].
31