AT&T 1070 manual Delay ring

PHONE SETTINGS

OFF

DELAY RING

Phone settings

Delay ring

Use this feature to set the length of time before incoming calls ring at this telephone.

1.Press [ENTER].

2.Press [] or [ ] until you see PHONE SETTINGS. Press [ENTER].

3.Press [] or [] until you see DELAY RING.

4.Press [] or [] to choose a setting, OFF or 2-30seconds. If you selected OFF, the telephone rings immediately when a call is received. If you did not select OFF, the telephone will ring after the desired ring delay time. A ring cycle lasts about six seconds.

5.To move to the next feature, press [].

-OR-

To exit setup, press and hold [ENTER].

NOTE: For the 1080 only, if the answering system (DTAD) delay time (ANSWER DELAY, see the ANSWER DELAY section on the 1080 user’s manual) is shorter than the delay ring time, the answering system answers the calls without the telephone ringing.

34