AT&T 1070 manual CSL delay ring

CENTREX

02 SEC

CSL DELAY RING

Centrex

CSL delay ring

Set the length of time before this phone routes a call to the Centrex console phone. One ring cycle lasts about six seconds.

1.Press [ENTER] on the desired system telephone for the Centrex service (except the console telephone).

2.Press [] or [] until you see CENTREX. Press [ENTER].

3.Press [] or [] until you see CSL DELAY RING.

4.Press [] or [] to choose the desired delay time (2–30 seconds). On the console telephone, choose OFF.

5.To move to MAIN MENU, press [].

-OR-

To exit setup, press and hold [ENTER].

NOTE: If you want the DTAD to answer calls, the CSL DELAY RING time should be longer than the ANSWER DELAY time (page 58) on the same 1080 telephone.

75