Perfectone Net Ware IP 300 manual Enter the subnetmask address, 202.67.240.221

Page 12

c. Press SPK to confirm.

Now you’ve finished inputting the LAN parameters, please press “Redial” return to “network settings” screen, press “Redial” again to access “save settings” screen. Press “SPK” and it will show “save Are you sure”. Press “SPK” again to reboot the IP phone. After booting, the screen will be like that: '()

*

12

IP 300 User Manual

b. Enter the subnetmask address

!

1.When """""""""""" appears, press “SPK” then “Local IP”

button to input the subnetmask address.

2. Use the dialpad to enter the subnetmask address. For example:

255.255.255.0

!

######

(Please press “*” button to input “.” separating the 4 groups of numbers.)

3.Press SPK to confirm and input the next parameter c. Enter the gateway (router) address

1. When

""""""""""""

appears, press SPK followed by Local IP

button to input the router (gateway) address.

2. Use the dialpad to enter the gateway address. For example:

192.168.1.254

#$

3.Press SPK to confirm and input the next parameter d. Enter the dns address

1.When """""""""""" appears, press SPK followed by Local IP button to input the dns address.

2.Use the dialpad to enter the dns address. For example: 202.67.240.222

3.Press SPK to confirm and input the next parameter e. Enter the secondary dns address

%$

1. When

appears, press SPK followed by Local IP

""""""""""""

button to input the secondary dns address.

b. Use the dialpad to enter the secondary dns address. For example:

	&
202.67.240.221	%$
	%$

Image 12

Contents Page Page Before Getting Started Product DescriptionFeatures Function Keys of IP 300 IP Phone Introduction Normal StateHardware SoftwareStandard and Protocol Operating requirementsElectric requirements IP 300 IP Phone supports following standard and protocolPower 5 W max SizeWhat is the IP Addressing of your network? Connecting the Handset and CablesPage Using the Keypad to Configure the IP phone Enter setting modeWhat if your network is using Dhcp Addressing? Page What if your network is using Static IP Addressing ? Enter the Local IP addressEnter the subnetmask address 202.67.240.221Menu Structure Page Page Using the Web Browser to configure the IP phone Network Setting Page Protocol settings Page Page Page Service id Voiptest.com Page Phone settings Page Page Audio settings Other settings Setting Page using ordinary pin with Debug set as 0 disable Phone Book Illustration Telnet Configuration Save current settings to designated position Load designated settings to current positionExit with saving all configurations and restart IP Detail description of IP 300 Telnet commands Command ?Will be displayed Command set Syntax description set keywords value Detailed description Set iptypeSet pppid Set ppppinSet ip Set subnetmaskSet service type Set nataddr Set nattraversalSet serviceid Set nattraversalSet nat ttl Set phonenumberSet account Set pinSet signalport Set registerportSet controlport Register ttlSet rtpport Jitter sizeXSet localtype Set dtmfSet dialnumber Number. set dddcodeSet iddcode Set iddprefixSet dddprefix Set innerlineSet localpreifx Set nonlocalprefixSet fwdpoweroff Set fwdnumberSet fwdalways Set fwdbusySet audioframes Set password Set upgradeaddrCommand store Relevant Usage store Command loadRelevant Usage load Command exit Relevant usage None Command writeFtp command Syntax description ftp value Relevant usage ftp To place a call Call another IP 300 IP phone under the same GatekeeperReceiving a Call Speed DialingStoring a Number into Memory Dial Dial a Stored NumberKeys Press Press Twice